Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73122
PTI System & ignition live
Is there any way to set the PTI phone system (2006 D3HSE) to shut down when the ignition is switched off? I found myself connected via the car when I was at the back of a local PC World & the car was in the car park. Also I've had the car grab a call when I've walked out of the house, all I could do is cut off the call and redial. This is very annoying to put it mildly, the best the sales rep at the dealer could suggest was manually disconnect BT every time I leave the car.
Any thoughts?
Derek
PS my local dealer's technical boffin thinks he now has the right patch for using the 6230i and cradle 3 together properly rather than just as a very expensive charger. I'll advise if it works or not. Fingers crossed.
11th May 2006 11:10 am
djheaton321
Member Since: 18 Sep 2005
Location: Northamptonshire
Posts: 45
It does work. Had mine downloaded a couple of weeks ago. Also means that you have to connect bluetooth manually if you don't want to put the phone in the cradle. Before the software was downloaded it connected on bluetooth automatically. Sounds like it will stop your problem, experienced the same thing a couple of times and it can be annoying!Discovery 3 TDV6 HSE
Defender 90 XS - now with a Webasto FBH that works!
11th May 2006 6:26 pm
eddtheduck
Member Since: 14 Mar 2006
Location: Norwich
Posts: 164
Does this seem right?
I am on the cusp of getting the cradle and the updated 6230i software installed but my dealer (Marshalls in Cambridge) reckon installing the software and pairing the phone takes 90 min and they plan to charge me at full rates for the privilege. They do however say it works really well with the phone.
If this is fair I'll pay but no-one else on the forum seems to have mentioned this level of cost.
Currently tempted to take my business elsewhere or use Bluetooth that works perfectly.2008.5 D3 HSE, Stornoway, Ebony
2007 BMW 335iSE - lust for speed satisfied
11th May 2006 6:33 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73122
At the moment just waiting to see if it will actually work, then will haggle over price. To be charged for upgrading the software is a bit rich considering the phone "authorised" for the cradle in not obtainable except on ebay. If it is too much I'll just stick with BT connection but full integration would be very useful. Hopefully it can cure the BT connection staying live when I'm not in the car.
Hopefully it can cure the BT connection staying live when I'm not in the car.
Does your handset not give you the option of accepting the call locally? My S700i asks 'Retrieve Call in Handset'?
11th May 2006 9:20 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73122
Not that I've seen in the 6230i menus & I've been through them pretty thoroughly.
12th May 2006 6:28 am
scorpio
Member Since: 26 Feb 2005
Location: Birmingham
Posts: 237
Mine does this a lot Sharon will go out to the car and as soon as she unlocks the car the phone connects, on a 6230i which is what I have as soon as you hyave answered in the left corner is a loudspeaker option press this twice and it comes back to normal handset.
12th May 2006 7:41 am
blue meanie D3 Decade
Member Since: 04 Aug 2005
Location: Newbury
Posts: 6861
djheaton321 wrote:
It does work. Had mine downloaded a couple of weeks ago. Also means that you have to connect bluetooth manually if you don't want to put the phone in the cradle. Before the software was downloaded it connected on bluetooth automatically. Sounds like it will stop your problem, experienced the same thing a couple of times and it can be annoying!
it should still connect BT automatically and then switch to cradled-mode when in the cradle, my 6230i does this after having the infotainment s/w upgraded.
Malcand theeeeennn......???
12th May 2006 7:52 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73122
Will try that scorpio, means at least I don't have to redial.
Derek
12th May 2006 10:32 am
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50979
Re: PTI System & ignition live
DSL wrote:
Is there any way to set the PTI phone system (2006 D3HSE) to shut down when the ignition is switched off? I found myself connected via the car when I was at the back of a local PC World & the car was in the car park. Also I've had the car grab a call when I've walked out of the house, all I could do is cut off the call and redial. This is very annoying to put it mildly, the best the sales rep at the dealer could suggest was manually disconnect BT every time I leave the car.
Any thoughts?
I had this issue but I found it was my phone that was not returning to handset mode when leaving the motor - not a fault of the PTI.
Most bluetooth systems only have a range of approx. 30ft so it is unlikely that the PTI would hold onto your phone much beyond that and once it's out of range PTI is not in control of it. See if your phone has any icons on the screen that represent 'headset' mode - if so then check if it remains on after you are 40-50ft away from the motor. If yes then you may need to reset your phone in some way.21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
12th May 2006 1:39 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73122
Tx, will have a try. Will also try dialling a number that will not answer and get my wife to take the phone & walk away from the car to see when the ringing in the car stops.
P.S. This only happens when you're making or receiving a call.
12th May 2006 11:25 pm
scorpio
Member Since: 26 Feb 2005
Location: Birmingham
Posts: 237
Just a thought but if you on the phone go to :settings >enhancements>handsfree and turn ingnition detector on it should discconect when you turn the ignition off and remove the key I know mine does.
13th May 2006 11:26 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73122
Ignition detaector is already at on, no difference. From the help text on the phone that is prob for a fixed kit to shut the phone down when ignition is switched off. From a phone kit engineer a while ago, that is meant to stop the phone being live in a petrol station but most people have it bypassed.
13th May 2006 11:34 am
Roddy
Member Since: 18 Apr 2005
Location: Aberdeen
Posts: 132
I just picked up my new D3 S today which has Voice and phone fitted. I have a 6230i and my dealer says it won't work in a cradle, so I'm stuck with BT. I would be keen to buy and use a cradle. Can any of you confirm that it is possible to use the 6230i snd if so which cradle / software is required.
Whilst I'm on the subject, the Voice for the phone in BT mode works great, but I'm unable to control the audio, my man only recognises Phone commands?Discovery 3 'S' Bonatti Grey.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
