Member Since: 03 Nov 2007
Location: Glorious Devon
Posts: 3254
Mantec Sump Guard - Any Suggestions
I've just fitted a new Mantec sump guard to my D4. Genuine LR Part No:VPLAP0024.
No matter how I try, I cannot get the leading edge gap to close to less than 30mm under the bumper. On my D3 the plate fitted almost flush up under the bumper. I've tried three times to refit making sure that I'm using the right holes (as if!), that there is no obvious obstruction. It seems that the plate isn't formed correctly but that's not likely is it?
Any advice appreciated. I've written to Mantec but I guess no reply will come until mid-week..
Photos in my gallery marked 1 Jan 2010.
Bill WrightNever take life too seriously. Nobody gets out alive anyway.
D4 SDV6 SE Tech Kaikoura Stone MY15.
1st Jan 2010 4:48 pm
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15257
Wow Bill, in that side angle pic it looks way out.
You've obviously checked there's nothing fouling at the front end as you tighten the bolts up - ?
Whether it's Mantec or LR, you need to pursue wherever you bought it from.
[It's as if it's a first prototype - not the finished article ! ]...... always on the road less travelled 🚧
bent wrong even they get it wrong some times send it backHome of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication [email protected] D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
1st Jan 2010 6:57 pm
Bill Wright
Member Since: 03 Nov 2007
Location: Glorious Devon
Posts: 3254
Ron
The bolts at the front are fully home - there's no obstruction. I took it off twice to check and check again. It looks like Uncle Ray's right, it's not the right bend angle.
Back to the supplier I guess.
BillNever take life too seriously. Nobody gets out alive anyway.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum