Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO3.CO.UK > Maintenance & Mods (D4)

Mantec Sump Guard - Any Suggestions
Post Reply  Down to end
Page 1 of 1
Bill Wright
 


Member Since: 03 Nov 2007
Location: Glorious Devon
Posts: 3254

England 2015 Discovery 4 3.0 SDV6 SE Tech Auto Kaikoura StoneDiscovery 4
Mantec Sump Guard - Any Suggestions

I've just fitted a new Mantec sump guard to my D4. Genuine LR Part No:VPLAP0024.

No matter how I try, I cannot get the leading edge gap to close to less than 30mm under the bumper. On my D3 the plate fitted almost flush up under the bumper. I've tried three times to refit making sure that I'm using the right holes (as if!), that there is no obvious obstruction. It seems that the plate isn't formed correctly but that's not likely is it?

Any advice appreciated. I've written to Mantec but I guess no reply will come until mid-week..

Photos in my gallery marked 1 Jan 2010.

Bill Wright Never take life too seriously. Nobody gets out alive anyway.


D4 SDV6 SE Tech Kaikoura Stone MY15.  
Post #5725801st Jan 2010 3:48 pm
View user's profile Send private message View poster's gallery Reply with quote
ronp
 


Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15261

Scotland 2014 Discovery 4 3.0 SDV6 HSE Auto Corris GreyDiscovery 4

Wow Bill, in that side angle pic it looks way out.
You've obviously checked there's nothing fouling at the front end as you tighten the bolts up - ?
Whether it's Mantec or LR, you need to pursue wherever you bought it from.
[It's as if it's a first prototype - not the finished article ! ] ...... always on the road less travelled 🚧  
Post #5726161st Jan 2010 5:25 pm
View user's profile Send private message View poster's gallery Reply with quote
RLD
Uncle Ray 


Member Since: 18 Jul 2005
Location: all ways some where
Posts: 11934

United Kingdom 2005 Discovery 3 TDV6 SE Auto Zambezi SilverDiscovery 3

bent wrong even they get it wrong some times send it back Home of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication ray@rld-tech.co.uk D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"  
Post #5726351st Jan 2010 5:57 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Bill Wright
 


Member Since: 03 Nov 2007
Location: Glorious Devon
Posts: 3254

England 2015 Discovery 4 3.0 SDV6 SE Tech Auto Kaikoura StoneDiscovery 4

Ron

The bolts at the front are fully home - there's no obstruction. I took it off twice to check and check again. It looks like Uncle Ray's right, it's not the right bend angle.

Back to the supplier I guess.

Bill Never take life too seriously. Nobody gets out alive anyway.


D4 SDV6 SE Tech Kaikoura Stone MY15.  
Post #5726631st Jan 2010 7:01 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site