Flash16
Member Since: 26 Sep 2009
Location: East
Posts: 8
  
|
| Suspension higher on one side ?? |
|
Hi
I have read lots of pages of suspension problems, but got a bit lost with a few.
My problem is, mainly at the rear, one side is approx 50mm higher than the other.
When I shift through access height, to normal to off-road it stays about the same.
I have just had sensors replaced, was OK when I picked up from Garage, but guess what, got home and it is same as when I left it at garage in morning. They told me it was sensors, and replaced both, but ?? what do I do now ?
Can anyone please point me to same as, or what it might be ??
Cheers
Geo 
|
 4th Nov 2009 7:42 pm |
|
|
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
 
|
did they calibrate after height sensor replacement? I'm guessing not.... takes about 30 mins with an Autologic
|
| 4th Nov 2009 7:54 pm |
|
|
Flash16
Member Since: 26 Sep 2009
Location: East
Posts: 8
|
| Suspension higher on one side ?? |
|
Thanks 10forcash
What does calibration do for the "fix" ??
|
| 4th Nov 2009 8:39 pm |
|
|
methley
a.k.a. Big Hairy Ski Monster
Member Since: 07 Oct 2008
Location: Marshfield, South Glos
Posts: 2433
 
|
Your suspension will be put in calibration mode. All the height sensor offsets will be adjusted so that each corner sits at the correct height. Then your suspension is put back in normal mode and you'll be happy! Andy
Fridge Slide for sale https://www.disco3.co.uk/forum/post2064622.html#2064622
|
| 4th Nov 2009 8:51 pm |
|
|
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
|
wot he said ^^^ 
|
| 4th Nov 2009 9:17 pm |
|
|
