Member Since: 30 Apr 2009
Location: Worthing
Posts: 376
Copy of LR Instructions for Side Body Mouldings
Any one have a soft copy of the above? The Owner Info site appears to be down, and the copy that was sent with my mouldings appears to have been printed out on an askew dot matrix printer set to save ink...
3rd Jul 2009 3:03 pm
Renton
Member Since: 13 Jan 2009
Location: Somewhere in the middle
Posts: 1718
PM send.
3rd Jul 2009 3:10 pm
JamesG01
Member Since: 30 Apr 2009
Location: Worthing
Posts: 376
PM replied to...
3rd Jul 2009 3:28 pm
Ken
Member Since: 20 Feb 2006
Location: Here
Posts: 10865
No paint protection
Alcohol wipes
Heat up panel and moulding
Or....
No Nails tape The End
3rd Jul 2009 3:40 pm
JamesG01
Member Since: 30 Apr 2009
Location: Worthing
Posts: 376
Slimer,
I'm considering the No More Nails Tape, actually, after seeing so many references to it.
Would I have to take the LR-supplied adhesive off first before using the NMN?
Cheers,
James
5th Jul 2009 12:49 pm
frenchy
Member Since: 05 Dec 2007
Location: Liverpool
Posts: 1037
All of the above (clean, then clean again, then clean with the alcohol wipes, and heat the doors with hair dryer) I used the original tape AND the ‘No More Nails’ tape.
I used a string line to set out the underside of the strip.
I then got MrsFrenchy to tightly hold a flexible straight edge against bodywork that rubbing strip could 'rest on' whilst I pressed it into place............with all that tape on it would be nearly impossible to reposition if they weren't lined up correctly
5th Jul 2009 3:50 pm
JamesG01
Member Since: 30 Apr 2009
Location: Worthing
Posts: 376
Frenchy et al,
Thanks for the tips...Will try some amalgamation of all...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum