disco4x4au
Member Since: 19 Jan 2006
Location: Perth
Posts: 409
|
Hi all,
Does anyone know if it is possible to retro-fit armrests onto the manual leather seats? Feeling around the side of the seat, there seems to be a hole behind the leather where presumably the armrest would fit (at least on the Australian spec SE).
Cheers,
Gordon ex - 2006 D3 TDV6 SE, silver, with lots of stuff - R.I.P.
ex - 2009 D3 TDV6 SE, silver, had lots of stuff too!
Now - 2010 RRS 3.0 TDV6, rimini red, 18" rims + Cooper LTZ, rear eLocker, Spider tuning box, GOE protection plates and rock sliders, GOE 3way shortened rods.
|
 22nd Mar 2006 6:27 am |
|
|
JMC
Member Since: 25 Feb 2006
Location: Aberdeen-Angus. Where the Bull* comes from!
Posts: 6417
|
The manual leather seat is a totally different seat to the higher spec seat with an armrest. When I initially considered getting a lesser model (S with leather option in UK) I was told that it 'may' be possible to retro fit the armrest but not for sure. It would be like taking a Toyota wheel and trying to fit it to your D3 - might work, but wouldn't be ideal. Hope this helps.
PS. This was one of the reasons I went for the higher spec with electric leather and armrest - couldn't live without it now 
|
| 22nd Mar 2006 10:46 am |
|
|
grommet
Member Since: 15 Feb 2005
Location: Northern California
Posts: 331
|
A custom seating place may be able to work some magic...
|
| 22nd Mar 2006 11:10 am |
|
|
disco4x4au
Member Since: 19 Jan 2006
Location: Perth
Posts: 409
|
I guess the reason I was asking was because there does seem to be a hole where the armrests would fit, even in the manual seats. Presumably something will fit in there??
Cheers,
Gordon ex - 2006 D3 TDV6 SE, silver, with lots of stuff - R.I.P.
ex - 2009 D3 TDV6 SE, silver, had lots of stuff too!
Now - 2010 RRS 3.0 TDV6, rimini red, 18" rims + Cooper LTZ, rear eLocker, Spider tuning box, GOE protection plates and rock sliders, GOE 3way shortened rods.
|
| 23rd Mar 2006 1:17 am |
|
|
