Member Since: 01 Sep 2012
Location: Hong Kong
Posts: 60
did mine a couple months back!
08 Java Black TD V6 D3 | ARB Bull Bar | Smittybilt X2O 12K Gen2 Wireless Winch | ARB A32 Intensity LED Driving Lights | De-tango’ed | Safari Snorkel | Poly Bushings (red) | Silicone IC Hoses | EGR Blanked | BAS Remapped | Dual Battery | Smoked Indicators | Rock Sliders | Compomotive PD1881 Rims | Cooper STT Pro 285/65/18 | HEL Brake Lines| DBA Brake Disc w EBC Yellow Stuff Pads | Mobicool FR-35 Compressor Fridge | Rear Camera | D4 LED Rear Lights | Kaymar Rear Bar w RHS RB Carrier |
24th Apr 2015 3:54 am
twinpipes
Member Since: 23 Apr 2015
Location: Ireland
Posts: 51
Great job done by all, i think i will give it a go. What is the part number of the indicator bulb as it seems to be a wedge base.
3rd May 2015 12:58 pm
Rich_R
Member Since: 13 Sep 2015
Location: Dubai
Posts: 2
Can anyone tell me which bulbs to use for the indicators? Or are they the same ones originally recommended a few years back?
Thanks!
21st Sep 2015 1:37 pm
Verydisco
Member Since: 02 Jan 2005
Location: A bit there, a bit over there and sometime at home, France
Posts: 1006
I CAN'T BELIEVE WE STARTED THIS... OVER 6 YEARS AGO !!!l=Oo\________/oO=l l:Ool======loO:l
Current
RANGE ROVER Vogue 4.4L TDV8 - 2012 - Orkney Grey, on Black, on Piano Black.
RANGE ROVER Vogue 4.4L V8 - 2002 - ex-2003 G4 Challenge Event Vehicle, Stage 3: Australia
FREELANDER 2 Td4 HSE "000" - Santorinin Black on Black
Gap Diagnostics' Classic and BT IID Tools!
Previous:
RANGE ROVER TDV8 x3
RANGE ROVER Td6 x1
RANGE ROVER Classic 3.5L V8 x1
DISCOVERY III x3
DISCOVERY II x3
DISCOVERY I x4
21st Sep 2015 8:32 pm
KrioK
Member Since: 25 Apr 2014
Location: Rio de Janeiro
Posts: 6
If I use the oven technique, I need to remove the parts related to xenon? (please see attached file in red) or I can put altogether? Thank you!
24th Sep 2015 3:11 am
crwoody
Member Since: 09 Mar 2009
Location: Littleborough
Posts: 2109
Rich_R wrote:
Can anyone tell me which bulbs to use for the indicators? Or are they the same ones originally recommended a few years back?
Member Since: 09 Mar 2009
Location: Littleborough
Posts: 2109
KrioK wrote:
If I use the oven technique, I need to remove the parts related to xenon? ....
I did mine in the oven and didn't remove anything except for the screws between the housing body and lens, I just propped them up with the lens uppermost in the oven which was pre-heated to about 100°C for around 5 minutes or so, doing it this way there is insufficient heat transfer to the inside of the unit to do any damage to internal components.Clive
24th Sep 2015 7:37 am
KrioK
Member Since: 25 Apr 2014
Location: Rio de Janeiro
Posts: 6
I tried first the oven technique but was not very successful. The xenon cover melted (I'll scan the other part and print in 3d printer). So I used the heater to detach the lens. My intention was to put a Daytime light ring (120mm) inside.
In my opinion it was very difficult to separate the headlamp lens from the body. So I made a small hole for passing the wire and for a while I connected in the "lamps on" until find a best way to connect.
Do you know what is the best place to connect daytime light cable? Any "original" place to connect, fuse?
I know that Discovery 4 (LR4) Daylight running lamps switch on automatically when the ignition is on, the gear selector is out of park (AT transmission) and when the parking brake is not applied but I don't know how do it in LR3.
3rd Oct 2015 5:26 am
A1tony
Member Since: 29 Sep 2012
Location: Shepperton, Surrey
Posts: 55
Headlamp Amber Delete
Done mine this weekend using this guide (thanks very much)! The only thing I would add is make sure your wiring loom inside em lamp doesn't get trapped otherwise the cables to the bulbs might not reach where they need to go!
I may have to go back in to free one of them off but I might also look at doing the DRl rings as well.
Edgar's
Tony
Rimini red TDV6 BAS mapping and remote FBH. EGR blanked. Hawkeye just in case. TSL and Actevo. De Tangoed with full LED's and 32" Light Bar.
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
5th Oct 2015 6:59 am
A1tony
Member Since: 29 Sep 2012
Location: Shepperton, Surrey
Posts: 55
Thanks!
32" curved is a perfect fit...Rimini red TDV6 BAS mapping and remote FBH. EGR blanked. Hawkeye just in case. TSL and Actevo. De Tangoed with full LED's and 32" Light Bar.
5th Oct 2015 7:07 am
ianb4310
Member Since: 22 Feb 2015
Location: Gainsborough
Posts: 513
Did mine this morning following this guide it's brilliant information
D4 rear lights
Beanie grill
Dynachip remap
4x4 info
HSE Wheels
14th Nov 2015 12:49 pm
jay-greenhalgh
Member Since: 08 Nov 2015
Location: Manchester
Posts: 3
Great guide
Started mine this morning and I'm liking the nice new look
15th Nov 2015 11:32 pm
jay-greenhalgh
Member Since: 08 Nov 2015
Location: Manchester
Posts: 3
Click image to enlarge
15th Nov 2015 11:48 pm
gardendisco
Member Since: 05 Jun 2015
Location: Belfast
Posts: 113
Parents have a 4 oven aga and I think the warming oven has a temperature of ~85'c, as far as I know the heat comes from all the walls and floor, would it be ok to throw the headlight in on a towel lens down?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
