Tiger
Member Since: 13 Mar 2006
Location: Wales
Posts: 488
  
|
| Do Light gurards leave a hole? |
|
I fancy a set of light guards (front & rear) but it looks like they leave a hole in the front wing not sure about the rear  .
The LR dealer says not and I have the instructions and they are not clear.
Anybody done this?
|
 16th Mar 2006 5:18 pm |
|
|
Slimer
Site Moderator
Member Since: 06 Jan 2005
Location: Last Exit to Nowhere
Posts: 16295
|
Does it show a drill anywhere on the instructions? If so expect a hole
|
| 16th Mar 2006 5:19 pm |
|
|
Tiger
Member Since: 13 Mar 2006
Location: Wales
Posts: 488
|
No drill shown but not that clear, shows what looks like a self tapper
Have uploaded to my server if you want to look at them
www.simpledev.co.uk/405_L319FrontLampGuards.pdf
|
| 16th Mar 2006 5:27 pm |
|
|
grommet
Member Since: 15 Feb 2005
Location: Northern California
Posts: 331
|
No, there is no hole made in the front fender. In fact, both front and rear can be removed and you'd never know they were there from the outside.
|
| 16th Mar 2006 5:45 pm |
|
|
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
|
Had my front lights out at the weekend. I think there are 2 ready-holes behind the lights for 2 rubber bungs to fit into. The self-tappers screw through these, rather than anything expensive, to hold the outer frame on. The light guard then screws on to this exposed frame.
So I don't think there will be any drilling or tapping into bodywork. Looks to be an easily reversable upgrade.
Edit:  , out typed again, see above!
|
| 16th Mar 2006 5:48 pm |
|
|
Roddy
Member Since: 18 Apr 2005
Location: Aberdeen
Posts: 132
  
|
The rears do require drilling behind the light cluster to hold the bracket. There is no drilling on the outer panel. Discovery 3 'S' Bonatti Grey.
|
| 16th Mar 2006 6:49 pm |
|
|
