Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
jammy dodger
Member Since: 11 Nov 2008
Location: West Midlands
Posts: 14
![](templates/vbnew/images/spacer.gif)
|
keeping to the theme of this posting , my front screen does work but there are 2 sections that dont appear to be.
First one is roughly centre screen and about 1cm wide top to bottom , second one is far right (drivers side) of the screen and this one is about 2.5 - 3 inch wide again top to bottom.
Would this indicate that the filiament in the screen itself has gone in those places?
|
5th Jan 2009 4:08 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
![](templates/vbnew/images/spacer.gif)
![2015 Discovery 4 3.0 SDV6 HSE Auto Fuji White 2015 Discovery 4 3.0 SDV6 HSE Auto Fuji White](../images/veh/fuji_white.gif)
|
Screen in in 2 halves ..there is a gap of about 10 millimeter down the middle
There is also both edges of the screen that are also not covered ...these taper down so a bigger gap at the bottom than the top ...perfectly normal
Have a close look at the screen and you will see no heating elements in the middle and down both edges G4 Gone ...but not forgotten
|
5th Jan 2009 4:24 pm |
|
|
jkp
Member Since: 17 Sep 2005
Location: Living among Bawbags
Posts: 4528
![](templates/vbnew/images/spacer.gif)
|
I notice mine take that much longer to clear than last year at this time Still clears, but not as fast. I may have to have a try at what TFC mentioned about saving energy setting. My front screen switches off before it's cleared, needing a secondary prod of the switch.
|
5th Jan 2009 5:32 pm |
|
|
countrywide
Member Since: 16 Sep 2007
Location: UK
Posts: 6019
![](templates/vbnew/images/spacer.gif)
![2016 Discovery 4 3.0 SDV6 Graphite LE Auto Unknown Colour 2016 Discovery 4 3.0 SDV6 Graphite LE Auto Unknown Colour](../images/veh/unknown.gif)
|
My passenger side it fine, but the drivers side has some big vertical gaps. It is definitely where the elements are as you can see them. I guess some of them have burned out somehow.
Didn't get it changed under warranty as whenever I have had a screen changed I end up with another problem or some extra damage to trim or paint.
|
5th Jan 2009 5:36 pm |
|
|
Ian62
Member Since: 17 Mar 2007
Location: Cyprus
Posts: 238
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 TDV6 SE Auto Stornoway Grey 2007 Discovery 3 TDV6 SE Auto Stornoway Grey](../images/veh/stornoway_grey.gif)
|
I noticed an increase in time my front screen was clearing, apposed to last year, spoke to my stealer who told me that it is not meant to clear heavy ice (had a lot here) but for condensation.
Anyway at the weekend, with the car full of kids and wife and after a days skiing the front screen started to fog up so I turned it on and happy days it worked fine.
My stealer pointed out that in light frost it would work fine but the heating elements are thinner than the rear ones, which can pump out more heat, and are there as pointed out already only for condensation.
What do you think Stadt Panzer Power
|
6th Jan 2009 5:48 am |
|
|
pom
Member Since: 10 Feb 2008
Location: Worcestershire
Posts: 1790
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 SE Auto Bonatti Grey 2006 Discovery 3 TDV6 SE Auto Bonatti Grey](../images/veh/bonatti_grey.gif)
|
just noticed, the wipers work more slowly (manual 1 wipe mode) when front screen heater is on. Turn it off they go back to normal.
pom
|
6th Jan 2009 1:53 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.