Guys, yipee, it's here & fitted....
I now have the ARB winch bumper for the D3 fitted, 1st in the UK I think!.
Looks the dogs dodads, I must say.
Shame I haven't figureed out how to put pictures up on this site yet.
I got mine from Mr. Frogs in Didcot. super job.
Non StickI am a hob nobber.
18th Feb 2006 7:49 am
Vo Rogue
Member Since: 16 Jan 2006
Location: Melbourne
Posts: 123
I had a look at an ARB bar at the Victoria 4wd show today. Quite nicely made and looks good on a D3 - they had one on display. Also a Rhino Roof Rack that uses the roof rails which presumably are standard on all the D3's.
19th Feb 2006 5:42 am
grommet
Member Since: 15 Feb 2005
Location: Northern California
Posts: 331
If you have Front PDC, can I assume those will be lost with the new bumper? How do you go about disabling the Front PDC ECU? Or will just removing the sensors disable the system?
19th Feb 2006 6:31 am
CFB
Member Since: 02 Dec 2005
Location: Bradford, West Yorkshire
Posts: 6100
I had a look at an ARB bar at the Victoria 4wd show today. Quite nicely made and looks good on a D3 - they had one on display. Also a Rhino Roof Rack that uses the roof rails which presumably are standard on all the D3's.
Vo Rogue,
The roof rails are not standard on the D3 in Oz.
They can be ordered as a dealer fit or you can fit them yourself. Just keep in mind there are other alternatives on the market for roof bars and roof racks.
Chris2011 Discovery 4 (MY12) SDV6 HSE with General Grabber AT's, Traxide Aux Battery system, custom rear drawers and Autosafe half height cargo barrier
Gone - 2005 Discovery 3 TDV6 HSE
ARB Bull Bar, Warn 9.5XP Winch, IPF D/Lights, Cooper STT's, LR Raised Air Intake, Traxide aux battery system, custom drawers and half height Autosafe cargo barrier, Mitchell Bros 4x4 tow hitch
Member Since: 01 May 2005
Location: Oklahoma, USA
Posts: 27
Can anyone post the fitting instructions for the new ARB bar? Really curious if you have to drill up into the bottom of the frame rails like you have to do when you fit on the Disco 2. Thanks.was 00 D2 > then 04 D2 > now 05 LR3
Rockjock, will find out from my son who works at the company who supplied & fitted the ARB bumper.
Non Stick NickI am a hob nobber.
20th Feb 2006 10:55 pm
SN
Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710
Cool.....
And how much did this little beauty set you back then?
Also, being in Tony Bliar's nanny state, won't plod take a dislike to all that pedestrian flattening ironwork on the front of your machine?Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)
Rockjock, when the bumper was fitted 2 holes were needed but no vertically. There are 2 holes at the bottom of the bumper frame where blots pass vertically up in to tabs that are already on the chassis.
When I get a chance , I will do some in depth photos for the the forum, alternatively you could wait for a future edition of Land Rover Enthusiast Magazine, which is going to feature the vehicle.
Regards
Non Stick NickI am a hob nobber.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
