wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
  
|
Do these come as male and female ...or just one type that fits into its self ...cant seem to find any listings for male and female , so im assuming the one type does the male and female job
 G4 Gone ...but not forgotten
|
 15th Nov 2008 1:49 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
 
|
Yes, they're exactly the same design/fit kind of hermaphrodite (sp?)  Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 15th Nov 2008 2:06 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Hold on a minute fella........ Was that an electronics based answer that didn't come from Wiggs.....!!
Mate I'm shocked, ney stunned!
 Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 15th Nov 2008 2:08 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
|
I have never used them  ...i thought they were the same ..just thought i would check ....
I will go and stand in the corner with my dunce's hat on G4 Gone ...but not forgotten
|
| 15th Nov 2008 2:14 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Depends on how you buy them, but the smaller ones usually come as a pair (although don't need to be paired)
Here's a load of Anderson & anderson 'compatible' plugs....
http://www.connectortech.com.au/content/view/25/53/ Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 15th Nov 2008 2:15 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
|
Cheers  G4 Gone ...but not forgotten
|
| 15th Nov 2008 2:24 pm |
|
|
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
|
Cool thanks a lot G4 Gone ...but not forgotten
|
| 15th Nov 2008 5:50 pm |
|
|
bigdal
Member Since: 11 Jun 2008
Location: Worcestershire
Posts: 46
|
They do come in a number of colours which are not interchangeable / inter linkable
I.E. you have to have grey to grey or blue to blue grey to blue won't go together
Also try to get them crimped on with a decent crimper which will save you loads of grief later on
Darren Some people are only alive because it is illegal to shoot them!!!!!!
|
| 17th Nov 2008 9:10 am |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
|
Cheers Darren ....i have proffesional crimpers ..so im ok there G4 Gone ...but not forgotten
|
| 17th Nov 2008 11:25 am |
|
|
TallPaul
Member Since: 03 Jan 2008
Location: Near Reading
Posts: 1214
|
Wiggs - there are also different sizes sleeves to suit the size of cables that you are using.
I really recommend Torbury Connectors as a source. The prices are usually better than other places, they sell all the colours, and they do the sleeves and rubber caps as well if you are planning on having them laying around in the engine bay etc.
I know you have a big daddy crimper, but they are a heavier crimp than a standard battery term for example just as a general note.
|
| 20th Nov 2008 5:22 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
|
Thanks for the info ..good prices on there G4 Gone ...but not forgotten
|
| 20th Nov 2008 5:31 pm |
|
|
Bushwanderer
Member Since: 27 Nov 2007
Location: Northern Rivers, NSW, Australia
Posts: 2050
 
|
Hi Wiggs,
IIRC Anderson have a special hex(?) crimper. I could find no-one who had one (even autoelecs soldered them) and so I soldered them. They seem to be working fine, although I would have preferred crimping.
Let me know how you go.
Best Wishes,
Peter The Bearded Dragon
|
| 21st Nov 2008 3:49 am |
|
|
