Member Since: 09 Sep 2005
Location: Scotland
Posts: 619
Parkbrake Operation
How does the parkbrake work?
Is it one drum with brake shoes that opreates on both rear wheels or one drum for each of the rear wheels?
Also how is it activated/deactivated electrically?
13th Jan 2006 7:01 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26701
The insides of the rear brake discs form small drum brakes. The electrical actuator is a screw jack arrangement that pulls a cable to each wheel.
13th Jan 2006 7:21 pm
lr1
Member Since: 09 Nov 2005
Location: Crash and Burn
Posts: 156
BTW, If you keep the park break botton pressed down when you turn off the ignition, the park brake is not applied. Useful in the winter when there is a chance the park brake can seize in very cold conditions.
Remember to put the car in gear!
David
13th Jan 2006 7:54 pm
zig
Member Since: 09 Sep 2005
Location: Scotland
Posts: 619
Thanks for the information so far.
When I stop in traffic, as I have an automatic, I manually put the parkbrake on to prevent creep (I leave the vehicle in drive), rather than let my foot remain on the foot brake (which I believe can lead to brake disc warp on some types of vehicles).
Once I want to start moving I then let the vehicle automatically disengage the parkbrake by putting my foot on the accelerator.
This is the first vehicle I have owned that has an automatic gearbox although I have driven automatic a number of times on trips to the States.
It is also my first encounter with an electric parkbrake and at that one which automatically releases.
Is technique described above the same as that adopted by others with automatics?
14th Jan 2006 7:41 pm
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
on a side note, does anyone else experience a slight roll back / forward once the park brake is applied and the foot brake released? don't seem to remember it from early on into ownership - manual 'box BTW
Mine all so looks ok Home of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication ray@rld-tech.co.uk D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
14th Jan 2006 10:01 pm
graemem
Member Since: 31 Jul 2005
Location: Borders
Posts: 86
lr1 wrote:
BTW, If you keep the park break botton pressed down when you turn off the ignition, the park brake is not applied. Useful in the winter when there is a chance the park brake can seize in very cold conditions.
Remember to put the car in gear!
David
Being the sensible guy that I am 8) I left my car handbrake off at Christmas when the temp was down at minus 11. ANyway I put it in 2nd gear but the car continued to roll forward, albeit slowly. ended up having to apply the brake. The car was on a hill but it wasn't overly steep. Is this normal or do I have a problem?
14th Jan 2006 11:39 pm
Winger Site Moderator
Member Since: 15 Feb 2005
Location: UK
Posts: 3428
Member Since: 17 Sep 2005
Location: Living among Bawbags
Posts: 4528
10forcash wrote:
on a side note, does anyone else experience a slight roll back / forward once the park brake is applied and the foot brake released? don't seem to remember it from early on into ownership - manual 'box BTW
Mines does the same. So potentially anothr broke one
15th Jan 2006 10:19 am
Winger Site Moderator
Member Since: 15 Feb 2005
Location: UK
Posts: 3428
Beacuse of the nature of the drivetrain and the suspension - differentials etc. - a small amount of movement will be possible once the handbrake has been applied and the footbrake is released.
It feels like it moves much more than it actually does - more a rocking motion. Try coasting to a stop, then applying the parkbrake just before the vehicle stops.....it will stop abruptly, and rock a bit.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Law of Mechanical Repair:
