Radiojohn
Member Since: 20 Jan 2022
Location: Kettering
Posts: 11
  
|
| Gear Indication, D3 Manual, Temperature dependent Failure |
|
The dash gear indication only shows when ambient temp is below 10 degrees C. But when you stop, at a junction/roundabout etc, the gear indication goes out. Once travelling again it usually comes back (Have to calibrate XY to get gear indication when clutch depressed)
Its had new xy switch and Transfer Case Module.
Obviously something is failing when it gets warm.
Any pointers where to look
Thanks
John
|
 23rd Dec 2024 8:46 pm |
|
|
