Member Since: 22 Sep 2010
Location: Wales
Posts: 34
EPB binding one side only
Hello, I'm hoping forbsome advice having searched the site and haven't found anything relating to my current issue.
Having had both rear wheels off to apply some rust protection, I now have the passenger side park brake binding. With the wheel off, I can't rotate the disc to align with the adjuster wheel in the hope of being able to wind the brake off so that I can remove the disc for inspection.
Has anybody else had this issue and found a solution please? If pull the emergency EPB release cable, will that at least release the binding brake?
Many thanks
25th Nov 2024 8:27 pm
G3Z
Member Since: 16 Dec 2018
Location: South Wales
Posts: 567
Have you put a wheel nut on and used a breaker bar to rotate the disc?Defender 110 2.4 TDCi Utility Station Wagon.
2007 Disco 3 GS TDV6 Manual
200,000+ mile club 😎
25th Nov 2024 9:23 pm
sbh
Member Since: 22 Sep 2010
Location: Wales
Posts: 34
Hi G3Z
Yes, I've tried that but can only get it to move a tiny amount, like some slack is being taken up.
Potentially something as come off inside the drum, have you tried a socket on the hub nut and a bar?
Chances are pulling the emergency release cable won’t help, but it may. I’d try a bigger hammer if all else fails
Discovery 3/4 & RRS keys cut and programmed at your home or work
Apple CarPlay/ Android Auto retro fit - see it here
BAS Remaps/ EGR Blanking
Software updates/ enabling
Mobile Servicing & Repairs
26th Nov 2024 12:25 am
sbh
Member Since: 22 Sep 2010
Location: Wales
Posts: 34
I'll tray that this morning, new brake shoe kit is ordered!
26th Nov 2024 7:13 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10734
yeah, parkbrake off and then big hammer on the side of the drum
26th Nov 2024 12:14 pm
sbh
Member Since: 22 Sep 2010
Location: Wales
Posts: 34
Spot on about the big hammer, that knocked enough crust out to allow me to turn the hub and wind that side right off. Will get inside when the new kit arrives.
As you can see, my experience really shines on the jobs, not 🤣🤣🤣
As ever thanks for your input.
26th Nov 2024 12:46 pm
sbh
Member Since: 22 Sep 2010
Location: Wales
Posts: 34
Click image to enlarge
This is what fell out with the drum in situ, probably plenty more in there.
You’ll want to get the calliper and carrier off and the torx bolt out before getting the hammer out again though. 👍
Discovery 3/4 & RRS keys cut and programmed at your home or work
Apple CarPlay/ Android Auto retro fit - see it here
BAS Remaps/ EGR Blanking
Software updates/ enabling
Mobile Servicing & Repairs
26th Nov 2024 1:28 pm
sbh
Member Since: 22 Sep 2010
Location: Wales
Posts: 34
Click image to enlarge
For your amusement, this is what I found behind the front arch liners, I don't think they've been off in 18 years. It was really high quality compost!
Click image to enlarge
26th Nov 2024 6:01 pm
HairyFool
Member Since: 04 Jan 2023
Location: North Essex
Posts: 704
I found a huge amount behind the liner and the mudflap.
What really impressed me however was that there was no corrosion in the area as I feared when it fell out.A visitor from the dark side, my other vehicle is an is still an EV. Strictly speaking its SWMBO.
26th Nov 2024 6:35 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8243
It looks like the caliper is jammed to me by the state of the disc, the pads are only coming into contact with half the disc.It can when others can't,
It will when others won't,
It goes where others don't.
26th Nov 2024 6:48 pm
sbh
Member Since: 22 Sep 2010
Location: Wales
Posts: 34
The disc is moving freely now, but you're right, the lad contact is lacking. Will get that sorted when I do the rear brakes.
26th Nov 2024 7:40 pm
skunk38
Member Since: 05 Jan 2024
Location: South Wales
Posts: 123
With that amount of rust, I'm amazed your splash guards are still whole.
good luck. Volunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
26th Nov 2024 8:10 pm
sbh
Member Since: 22 Sep 2010
Location: Wales
Posts: 34
I know, the budget for this is slim, so I'm just doing the essentials for now. The chassis and sills are in decent condition having been treated previously. I bought this in July, so every day is a school day!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum