Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO3.CO.UK > Technical (D3)

DPF full - forced regeneration
Post Reply  Down to end
Page 1 of 1
marian
 


Member Since: 02 Oct 2016
Location: Lower Austria
Posts: 86

Austria 2008 Discovery 3 TDV6 SE Manual Rimini RedDiscovery 3
DPF full - forced regeneration

Hi,

I had a case of DPF full error on TDV6.
It was permanent, limp mode.
I tried to run forced regeneration using Icarsoft LR II but I did not get past "please wait" which changed to "failed" if I slowed down. As the cat was in limp mode, it was not possible to not slow down (no highway driving in limp mode).

I got the DPF cleaned and car now drives nicely but when I attempted forced regeneration just to make sure that everything works as it should I still do not get past "please wait" and the process fails if I slow down.

How is the forced regeneration working? Should it write something or is the "please wait" all one can see if it is running?
I want to make sure that regeneration is started and I do not end up with full DPF again.  
Post #237977218th Oct 2024 11:00 am
View user's profile Send private message View poster's gallery Reply with quote
Sidestick
 


Member Since: 22 Apr 2012
Location: Rome
Posts: 2321

Italy 2008 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

Hi Marian,
i suppose that via your icarsoft scanner you are able to see the DPF parameters in the "live data" section.
You should find:
- the % of soot in the DPF
- the mileage since last full and partial regeneration
- the range between 2 regeneration
- the differential pressure inside DPF
- EGRs postition

In order to check when the regen is in progress you have to monitor the catalyst downstream temp over 450°C , more than 550° C of EGT and both EGRs closed (5%)

Click image to enlarge

Click image to enlarge


And these are normal parameters on highway at around 120 km/h
Click image to enlarge
 - Easy-Lift suspension module 4.0
- GoodWinch 9500 lb
- Full underbody protections
- Tree/Rock sidebars
- Prospeed roofrack & ladder
- Compressor guard
- Raised Air Intake
- Driving lights (2+4)
- 50 mm Waffle boards
- Altox Heater control
- Overland Rooftop Tent
- Rear seats entertainment
- Front & Rear camera
- GVIF
- Removable tow bar
- Cubby box fridge
- BFG KO2 265/65R17
- iidTool BT  
Post #237979818th Oct 2024 1:41 pm
View user's profile Send private message View poster's gallery Reply with quote
marian
 


Member Since: 02 Oct 2016
Location: Lower Austria
Posts: 86

Austria 2008 Discovery 3 TDV6 SE Manual Rimini RedDiscovery 3

Yes, I can monitor live data.
I'll do that.
Thnks for detailed response.  
Post #237982618th Oct 2024 8:20 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site