Member Since: 28 Sep 2024
Location: Deep in the woods
Posts: 3
New DPF sensor and dpf issues
I am having some issues with the dpf and I am currently trying to fix it. But i have come now to a point where i have no idea how to move forward. I have not found a post regarding it.
Current status and history of stuff I did:
-Fixed the exhaust clamp between cat and dpf because previous owner bodged it.
-fitted new hose clamps on the dpf sensor hose because they were missing.
-installed new dpf sensor from hjs
-tested the hose for leaks
-blown through the two sensor pipe on the dpf
Issues i am having is that my icarsoft tool is telling me P244A and if i read the value of the Differential pressure Bank1 it only ready 0,03 kpa. It does not move even when driving. My thought is that it should at least fluctuated a bit even if there would be a exhaust leak i am not aware of.
My next idea was that it got to be something with the wiring. So i tested it via a crude method which is not really 100% conclusive but it gives me a maybe a clue. So I just unplugged the sensor and now the sensor reads 129 kpa. Which leads me to believe that the wiring is ok.
Also the dpf says it is full but even with that problem I should see some corect values with the icarsoft,right?
Does the new sesnor need some sort of adaptation?
I appriciate every help I can get Thanks in advance.
28th Sep 2024 10:34 am
Sidestick
Member Since: 22 Apr 2012
Location: Rome
Posts: 2321
Yes the new sensor need to be calibrated via diagnostic tool,
here a video with a similar problem:
&ab_channel=O%27RileysAutos- Easy-Lift suspension module 4.0
- GoodWinch 9500 lb
- Full underbody protections
- Tree/Rock sidebars
- Prospeed roofrack & ladder
- Compressor guard
- Raised Air Intake
- Driving lights (2+4)
- 50 mm Waffle boards
- Altox Heater control
- Overland Rooftop Tent
- Rear seats entertainment
- Front & Rear camera
- GVIF
- Removable tow bar
- Cubby box fridge
- BFG KO2 265/65R17
- iidTool BT
29th Sep 2024 6:18 pm
TKWS
Member Since: 28 Sep 2024
Location: Deep in the woods
Posts: 3
Thank you. Do you know which tool is able to do that? Because on my icarsoft lr 2.0 i am not able to find it.
So even tho it is a Evoque and not a Disco3 it is the same issue o.O , interesting.
Thanks for the reply.
30th Sep 2024 8:19 pm
Sidestick
Member Since: 22 Apr 2012
Location: Rome
Posts: 2321
The one in the video for sure - Easy-Lift suspension module 4.0
- GoodWinch 9500 lb
- Full underbody protections
- Tree/Rock sidebars
- Prospeed roofrack & ladder
- Compressor guard
- Raised Air Intake
- Driving lights (2+4)
- 50 mm Waffle boards
- Altox Heater control
- Overland Rooftop Tent
- Rear seats entertainment
- Front & Rear camera
- GVIF
- Removable tow bar
- Cubby box fridge
- BFG KO2 265/65R17
- iidTool BT
30th Sep 2024 9:22 pm
TKWS
Member Since: 28 Sep 2024
Location: Deep in the woods
Posts: 3
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum