1. Was it done in Tight Tolerance Modes, and how did they achieve this?
2. Was the alignment done on a Hunter?
NJSS
9th Aug 2024 4:00 pm
TheGreenMachine
Member Since: 05 Nov 2023
Location: North Lincolnshire
Posts: 63
Not sure on either question, I'm afraid. Mechanic pal who's kit couldn't do it suggested using local Bush Tyres place, so the leader of the opposition took it in while she was in town shopping
Member Since: 08 Nov 2012
Location: Kent
Posts: 316
Found a local garage i didnt know had all the Hunter kit and they did a good job recently.
They advised the rear camber adjustment bolts were rusty before they attempted, but all went well. I had soaked them all weeks before in Deblock oil.
On yours, they havent adjusted the camber on front right and rear left. It will need doing. If they didnt mention or offer to do this, find another garage that will.
I also put mine in tight tolerance mode with diagnostic tool (FAULTMATE MSV-2).
Click image to enlarge
New Engine - Fitted with body on...
Developer of the FBH Smart Control Module - Keyfob 3rd button control + USB Diagnostics + remote status LED + priming + battery protection + water temp control setpoint (or fixed run time)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
