Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Faults & Fixes (D4)

Park Brake Fault
Post Reply  Down to end
Page 1 of 1
Tim-LR
 


Member Since: 29 Jun 2024
Location: Suffolk
Posts: 3

United Kingdom 2010 Discovery 4 TDV6 Commercial XS Manual Zermatt SilverDiscovery 4
Park Brake Fault

I recently purchased a 2010 Discovery. I’ve never had a car with an electric parking brake before, so I’m unsure on what the normal operation should be like.

If I try to use the handbrake switch, either to engage or disengage the brake, I get Park Brake Fault on the screen in the instrument cluster. I think I can hear the motor when doing this sometimes. If I drive off without touching the switch, the brake disengages. When switching off the engine, the brake engages fine automatically. When driving slowly, I can hear what I thought was a stone stuck in the rear brakes, could this actually be to do with the handbrake system?

I’m waiting for my diagnostic scanner to arrive. In the meantime, is there a likely cause of the above symptoms? I’ve tried looking at various threads and forums but not found someone with the same situation yet.

Thanks.
  
Post #237208929th Jun 2024 11:39 am
View user's profile Send private message View poster's gallery Reply with quote
PROFSR G
 


Member Since: 06 Mar 2017
Location: Lost
Posts: 5061

Ukraine 2009 Discovery 3 TDV6 Commercial XS Auto Stornoway GreyDiscovery 3

Likely the hand brake shoes/mechanism need servicing and if you're lucky all should be OK after that.

The rattle you are hearing could be a stone, or as is more likely one of the shoe retaining clips has let go and is being chewed by the rotating drum section of the disc.

There's a service guide in the Wiki section for the brakes on D3&4's which if you follow correctly will help you resolve these issues. Thumbs Up
 yµ (idµ - eAµ) ψ=mψ

 
 
Post #237209829th Jun 2024 2:55 pm
View user's profile Send private message View poster's gallery Reply with quote
Tim-LR
 


Member Since: 29 Jun 2024
Location: Suffolk
Posts: 3

United Kingdom 2010 Discovery 4 TDV6 Commercial XS Manual Zermatt SilverDiscovery 4

Thanks. I’ve also had the fuel gauge randomly stop working. Further research suggests the two problems may be related, something to do with corroded connections? It is giving error U2002-01 ‘Switch general electrical failure’.

It came from a dealer so I think my first course of action is let someone more experienced with modern Land Rovers than me have a look at it first!
  
Post #23722091st Jul 2024 7:56 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site