Member Since: 12 Feb 2021
Location: London
Posts: 141
How to charge battery and lock the car
Hi there, with the winter cold approaching I want to keep a trickle charger connected to the car. however if I attached the clips to the battery I struggle to close the bonnet. if I do close the bonnet is it ok to lock the car with the remote control, would it throw up any issues aka alarm bleeting all night?
BestDiscovery 4
Oct 2015, 2016 build
SDV6 Santorini Black SE
New engine at 42k
Car camper
30th Sep 2024 4:03 pm
skunk38
Member Since: 05 Jan 2024
Location: South Wales
Posts: 115
I think Martin does an adapter to plug into the tow electrics (if you have them) for charging.
I'm sure someone else will elaborate. Volunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
30th Sep 2024 5:33 pm
epninety
Member Since: 12 Oct 2012
Location: Hampshire
Posts: 329
Tow socket is one option.
I have small pair of wires running from the battery to a powerpole connector tucked in behind the grille surround next to the nearside headlamp.
Tucking it up inside the surround means it isn't directly exposed to the weather (it has a coating of vaseline on it and a rubber cover on it when not in use.)
When needed I simply hook it out with a finger, and plug it into the trickle charger.
There's a low value fuse at the battery to prevent any mischief if anyone does play with it.
It's been on there more than 10 years, hasn't caused any issues yet.
30th Sep 2024 6:24 pm
HairyFool
Member Since: 04 Jan 2023
Location: North Essex
Posts: 676
Likewise I have a lead permanently attached to the battery/chassis with a supaseal socket on it, coiled up and stowed into the inner wing where the air filter would go in on the other side.
Matching plug on the charger, if I want to close the bonnet there is a gap in front of the inner wing so I slip off the bonnet seal, pass the cable through the gap and it hangs down the wing so refit the seal and close the bonnet.
I did think of trying to fit a socket inside the dummy air intake but i'm too lazy.A visitor from the dark side, my other vehicle is an is still an EV. Strictly speaking its SWMBO.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum