Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Technical (D3)

Limp Mode when warm
Post Reply  Down to end
Page 2 of 3 <123>
Farmer Chalk
 


Member Since: 06 Mar 2013
Location: Independent Republic of Kentishshire.
Posts: 4193

England 2008 Discovery 3 TDV6 HSE Auto Tangiers OrangeDiscovery 3

Like your thinking.. certainly worth a go!
Many thanks for posting!
  
Post #237424430th Jul 2024 8:15 pm
View user's profile Send private message View poster's gallery Reply with quote
PROFSR G
 


Member Since: 06 Mar 2017
Location: Lost
Posts: 5034

Ukraine 2009 Discovery 3 TDV6 Commercial XS Auto Stornoway GreyDiscovery 3

It has been known to happen and is not all that rare either. If you open the filler cap after a run or when the fault event occurs, and you can hear vacuum escaping that's a certain indicator the cap breather is blocked.
 yµ (idµ - eAµ) ψ=mψ

 
 
Post #237424730th Jul 2024 8:41 pm
View user's profile Send private message View poster's gallery Reply with quote
Farmer Chalk
 


Member Since: 06 Mar 2013
Location: Independent Republic of Kentishshire.
Posts: 4193

England 2008 Discovery 3 TDV6 HSE Auto Tangiers OrangeDiscovery 3

Well.. great idea and fitted the bill… driving for 20 minutes, engine warm, causing vacuum lock etc…great idea in principle but unfortunately not the reason.. bought brand new genuine fuel cap this morning, drove back from the dealer, put the engine under a slight bit of load and bang…same fault, engine fault, suspension fault , gearbox fault etc etc.. total loss of power..

Cycle ignition and clears itself but still leaves me with P0087 fault code fuel pressure too low…
Aaarrgghhh. Big Cry
  
Post #237431731st Jul 2024 9:35 pm
View user's profile Send private message View poster's gallery Reply with quote
ballast
 


Member Since: 13 Apr 2007
Location: South Midlands
Posts: 185

United Kingdom 2016 Discovery 4 3.0 SDV6 HSE Lux Auto Santorini BlackDiscovery 4

Electrical? CAN bus?

2008 FFRR TDV8 - very similar set of faults to what you describe, including hard 'P' faults as well as many 'U' comms faults, engine fault, suspension, gearbox fault, you name it.

With my FFRR the problem got worse as it warmed up.

In the end concluded faulty ignition switch - I'm not suggesting this is the same, but the age of the vehicle means that the reported faults can be horribly misleading on a CAN that connects all the key modules, so it could be similar?

Replaced the ignition switch and bingo, everything solved

Just a thought and sorry if not helpful.
  
Post #23743271st Aug 2024 7:25 am
View user's profile Send private message View poster's gallery Reply with quote
defector
 


Member Since: 23 Feb 2009
Location: Greater Manchester
Posts: 1471

United Kingdom 2008 Discovery 3 TDV6 HSE Auto Zermatt SilverDiscovery 3

Is there a data logger that can be installed to the OBD.
Might show what's happening at the time it goes into limp mode.
  
Post #23743441st Aug 2024 10:45 am
View user's profile Send private message View poster's gallery Reply with quote
Farmer Chalk
 


Member Since: 06 Mar 2013
Location: Independent Republic of Kentishshire.
Posts: 4193

England 2008 Discovery 3 TDV6 HSE Auto Tangiers OrangeDiscovery 3

Going back into the garage vin Monday… unfortunately I don’t have the necessary skillset or knowledge I’m afraid…
  
Post #23744352nd Aug 2024 9:56 pm
View user's profile Send private message View poster's gallery Reply with quote
Brookie
 


Member Since: 17 Feb 2021
Location: Suffolk
Posts: 4


Sorry to read of your woes…
Any update on this as I’m having the same problems.
I’ve noticed that the oil temp sensor is faulty as I’m getting wildly fluctuating readings .

Not sure if a faulty oill temp sensor could trigger limp mode but it seems logical.
  
Post #237623930th Aug 2024 7:20 pm
View user's profile Send private message View poster's gallery Reply with quote
Farmer Chalk
 


Member Since: 06 Mar 2013
Location: Independent Republic of Kentishshire.
Posts: 4193

England 2008 Discovery 3 TDV6 HSE Auto Tangiers OrangeDiscovery 3

Apologies as there are a couple of other similar threads relating to this issue which I have updated but missed this one!

So went back to the garage and after a number of discussions with them we have fitted a new JLR fuel rail with incorporated fuel pressure sensor.. been back with me a couple of weeks now and all appears perfect…(presently) and maybe it’s too soon to say it’s cured but despite provoking it or trying to get it to default into limp home mode I have been unable to succeed.. which is great news so far..

The sensor has definitely made a difference as the car now behaves differently and when demanding power under load their seems to be a slight difference and almost a hesitation before changing down..

Fingers crossed and I will keep you all posted as lots of you are all reporting a very very similar fault…
  
Post #237624230th Aug 2024 8:03 pm
View user's profile Send private message View poster's gallery Reply with quote
Farmer Chalk
 


Member Since: 06 Mar 2013
Location: Independent Republic of Kentishshire.
Posts: 4193

England 2008 Discovery 3 TDV6 HSE Auto Tangiers OrangeDiscovery 3

Well a few weeks in and driving a number of miles on different errands I can report that the car has remained faultless.. so fitting a oem fuel rail and incorporated fuel rail sensor has still apparently made a big difference..
Will keep updating!
  
Post #23768798th Sep 2024 9:55 pm
View user's profile Send private message View poster's gallery Reply with quote
Brookie
 


Member Since: 17 Feb 2021
Location: Suffolk
Posts: 4


Good to hear - I also changed the pressure regulator and so far, no more limp
mode or low pressure fault codes.


The part I changed was

https://www.lrparts.net/hfs102-fuel-rail-m...ensor.html

As already mentioned, I noticed my oil temperature was all over the place and have a new temp sensor to fit but that doesn’t appear to be the root cause.

Best,

Matt.
  
Post #23768818th Sep 2024 10:09 pm
View user's profile Send private message View poster's gallery Reply with quote
Teessidelad33
 


Member Since: 10 Oct 2013
Location: Stockton On Tees
Posts: 17

United Kingdom 

Thank will give it a try.

Changed the low pressure fuel pump this weekend.
That was a task and a half. Fuel filter was completely block so not sure how it was working. So thought bingo this is the fix and all will be OK.
Also found flakes of rust in the tank so cleaned and removed all fuel and strained.

Drive for 7 miles all OK, fuel was low so went to garage and put in £25 , 5 or so miles later and Again LIMP MODE could of cried.

Any other thoughts people ??


Click image to enlarge


Click image to enlarge




YASRR wrote:
Forgive me if you have already considered/tried this but I had similar problems with a Defender.

The solution was a new fuel filler cap, the vent was blocked and after a while created a vacuum and wouldn't pump enough fuel.

Simon
  
Post #237987719th Oct 2024 7:42 pm
View user's profile Send private message View poster's gallery Reply with quote
Brookie
 


Member Since: 17 Feb 2021
Location: Suffolk
Posts: 4


Have you changed the fuel pressure regulator ?
  
Post #237988019th Oct 2024 8:41 pm
View user's profile Send private message View poster's gallery Reply with quote
Teessidelad33
 


Member Since: 10 Oct 2013
Location: Stockton On Tees
Posts: 17

United Kingdom 

Yes swapped with one from a working vehicle.
  
Post #237988119th Oct 2024 8:49 pm
View user's profile Send private message View poster's gallery Reply with quote
Brookie
 


Member Since: 17 Feb 2021
Location: Suffolk
Posts: 4


What fault codes are being reported?
  
Post #237988419th Oct 2024 10:02 pm
View user's profile Send private message View poster's gallery Reply with quote
Teessidelad33
 


Member Since: 10 Oct 2013
Location: Stockton On Tees
Posts: 17

United Kingdom 

Sorry for late reply

EGR circuit B - High P045D
Fuel rail/system pressure too low P0087
Fuel rail pressure sensor performance P0191

Cleared those messages ans next time it failed got these.

Injector control pressure too low P2290
EGR circuit B - High P045D

Cleared these then managed to do good 15 miles of slown fast roads and was fine.
I'm lost for ideas.
  
Post #238017223rd Oct 2024 7:41 pm
View user's profile Send private message View poster's gallery Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 2 of 3 <123>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site