sankeytrailer
Member Since: 24 May 2010
Location: suffolk
Posts: 25
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 XS Manual Buckingham Blue 2006 Discovery 3 TDV6 XS Manual Buckingham Blue](../images/veh/buckingham_blue.gif)
|
Dreaded clunk from front suspension ? |
|
I know this topic has come up before but I can't find it. I have the dreaded clunk from the front near side, especially when starting to reverse on right lock. It sounds and feels like someone has hit the chassis with a lump hammer. I changed the lower suspension arms with a kit from Advanced Factors last July. I have had the wheel off and tried to rattle everything by hand and nothing moves. Any ideas please ???
Thanks in advance.
|
8th Jan 2017 11:11 am |
|
|
Littlewill
Member Since: 14 Sep 2015
Location: Lincolnshire
Posts: 484
![](templates/vbnew/images/spacer.gif)
![2015 Discovery 4 3.0 TDV6 HSE Auto Firenze Red 2015 Discovery 4 3.0 TDV6 HSE Auto Firenze Red](../images/veh/firenze_red.gif)
|
If you suspect the lower wishbones have failed the best thing to do is get in there with a bar and try prizing at them. There is ALOT of weight sat on them so moving them by hand isn't likely to show much up.
|
8th Jan 2017 11:20 am |
|
|
bmbmdmb
Member Since: 11 Nov 2012
Location: yorkshire
Posts: 77
![](templates/vbnew/images/spacer.gif)
![2010 Discovery 4 3.0 TDV6 HSE Auto Santorini Black 2010 Discovery 4 3.0 TDV6 HSE Auto Santorini Black](../images/veh/santorini_black.gif)
|
D4 in my case. Did you find the cause?
I have changed the lower arms but also did the top front suspension arms too. Also from Advanced Factors (Meyle brand).
I have exactly same symptoms. When reversing full right lock I get a whine noise, particularly on slightly hill. All fixings correct torque, car tracked etc. I've double checked other fixings. No obvious cause.
I got a clunk dropping off kerb with just front left wheel. This is where sound is coming from. No wobble, vibrations on steering wheel, car drives smoothly and like a dream.
Thanks
|
9th Jun 2024 10:20 pm |
|
|
Sidestick
Member Since: 22 Apr 2012
Location: Rome
Posts: 2311
![](templates/vbnew/images/spacer.gif)
![2008 Discovery 3 TDV6 HSE Auto Java Black 2008 Discovery 3 TDV6 HSE Auto Java Black](../images/veh/java_black.gif)
|
Did you checked the wheel bearing? - Easy-Lift suspension module 4.0
- GoodWinch 9500 lb
- Full underbody protections
- Tree/Rock sidebars
- Prospeed roofrack & ladder
- Compressor guard
- Raised Air Intake
- Driving lights (2+4)
- 50 mm Waffle boards
- Altox Heater control
- Overland Rooftop Tent
- Rear seats entertainment
- Front & Rear camera
- GVIF
- Removable tow bar
- Cubby box fridge
- BFG KO2 265/65R17
- iidTool BT
|
10th Jun 2024 10:38 am |
|
|
bmbmdmb
Member Since: 11 Nov 2012
Location: yorkshire
Posts: 77
![](templates/vbnew/images/spacer.gif)
![2010 Discovery 4 3.0 TDV6 HSE Auto Santorini Black 2010 Discovery 4 3.0 TDV6 HSE Auto Santorini Black](../images/veh/santorini_black.gif)
|
Hello
I can feel no play on the wheel with it jacked up. It is very low mileage 38k. I'd be surprised if the wheel bearing has gone.
I was going to check the front most bolt torque for upper front suspension arm. It got torqued up correctly, new bolts. I'd need to remove wheel arch to access it from behind air suspension strut.
Other cars make a drone noise with failing WB. Nothing on any speed roads.
I was thinking drop links or ARB bushes? I can't detect any play when the front wheels are off the ground.
What do I you think?
|
10th Jun 2024 10:59 am |
|
|