Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Technical (D3)

More parking sensor woes
Post Reply  Down to end
Page 1 of 1
Ali4390
 


Member Since: 18 Jun 2021
Location: Derby
Posts: 51

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Siberian SilverDiscovery 3
More parking sensor woes

I hate to be writing this, as I know the topic has been done to death.

For a year I've had the long beep and flashing parking sensor light as soon as I turn the ignition on, with b1b58-11 / b1b57-11 error codes. And I've finally decided to do something about it.

The strange thing is I don't have any clicking from any sensor, and if I unplug either loom, the error code remains. The only way I can stop the beep is to remove connector C0957 from the parking module. This makes me think it might be an issue with the module itself, but then I think the issue has been since I fitted new, non-OEM front sensors, which I know can cause issues. I've had the front bumper off again and I can't see any obvious damage to any wires.

My multimeter leads aren't working and so I can't test voltage until new ones arrive. And I also don't have a clue what I'm doing in this regards, pointers for an idiot will be appreciated.

Could this be linked to the fact that my GVIF isn't currently connected to my sat nav? I can't see it being an issue but would like to rule everything out.

In summary, help me figure out what to try next please.
  
Post #237002230th May 2024 1:27 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10735

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

There is a short in either front or rear bumpers.

Likely to be a sensor, or loom short.

I would unplug the front loom and try and clear the codes. Then select reverse and park brake off.

If codes return, fault probably at rear.
  
Post #237002430th May 2024 2:06 pm
View user's profile Send private message View poster's gallery Reply with quote
Ali4390
 


Member Since: 18 Jun 2021
Location: Derby
Posts: 51

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Siberian SilverDiscovery 3

Thanks Pete.

I've tried that, based on your reply on another thread.

I've also tried unplugging the rear loom and clearing the codes. And they come back again.

Excuse the stupid question - how do I test voltage across the looms? Unplug the loom and use the multimeter on the pins coming from the loom?
  
Post #237002730th May 2024 2:34 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10735

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

Yeah. Test volts between black and brown.

If both looms unplugged and codes returning, looking like an ecu.
Test for a short between black and brown wires runnninv from the ecu though.
  
Post #237003430th May 2024 3:33 pm
View user's profile Send private message View poster's gallery Reply with quote
Ali4390
 


Member Since: 18 Jun 2021
Location: Derby
Posts: 51

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Siberian SilverDiscovery 3

I'm even more confused having tested both looms.

The front has a resistance of 10.8, based off testing the brown and black wire of the loom itself. I can't get a consistent reading of the brown and black wire on the connector that the loom plugs into, it occasionally flashed 140 and then returned to 1.

On the rear, I get a resistance of 10.8 as well, but that is testing the wires of the plug that comes from the car. For the loom itself, which has a connector to be plugged into, it's the same as the front in that I can't get a consistent reading.

I've disconnected the front loom and rewrote the CCF to disable the front sensors, and as I'm still getting the fault I will replace the rear parking sensors as the next step.
  
Post #237005430th May 2024 6:00 pm
View user's profile Send private message View poster's gallery Reply with quote
Ali4390
 


Member Since: 18 Jun 2021
Location: Derby
Posts: 51

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Siberian SilverDiscovery 3

Would a broken wire on the fog light impact the parking sensors?
  
Post #237210029th Jun 2024 3:55 pm
View user's profile Send private message View poster's gallery Reply with quote
LT
 


Member Since: 31 Dec 2005
Location: South West
Posts: 23866

United Kingdom 2016 Discovery 4 3.0 TDV6 Landmark LE Auto Santorini BlackDiscovery 4

I had a really tiny nick on one of the wires in the loom for the rear sensors on my D3. Probably caused by a stone when off-roading.

Hope you fix the problem quickly. Thumbs Up
 2006 D3 HSE (Original & still the best)-GONE
2010 D4 HSE (A bit bling)-GONE
2014 D4 HSE (Almost too bling)-GONE
2015 D4 HSE (A heated what?)-GONE
2016 D4 Landmark (Written Off)-GONE
2016 D4 Landmark (Surely the last!) PD1881 rims-GONE
2017 FFRR SDV8 Autobiography (now semi-retired) 
 
Post #237210129th Jun 2024 5:01 pm
View user's profile Send private message View poster's gallery Reply with quote
jamez79
 


Member Since: 03 Sep 2018
Location: Staffordshire
Posts: 595

United Kingdom 2012 Discovery 4 3.0 SDV6 XS Auto Indus SilverDiscovery 4

Have you tried just swapping the sensors? £24 for four off amazon. you could try them and if that fixes it, buy genuine ones or just leave the cheapo ones in.

I've just had to swap mine due to the long beep and an error code saying @short to ground" or something like that.

I swapped them out (link in my thread on here) and fixed. I've noticed the aftermarket ones seem a bit slow to respond, so I will buy genuine when I can afford it.
   
Post #237215130th Jun 2024 3:57 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site