Member Since: 11 Oct 2018
Location: Cornwall
Posts: 94
OEM Roof Crossbar screws ?
Hi all.
does anyone on here know if there is a part number for the Hex head adjustment screws on the OEM roof bars ??
Or alternatively size / thread ?
Obviously made with a head of finest Chineseum.
(Why was the roof designed in such a way that you have to adjust the width of the rear bar every time to fit / remove it ?).
Thanks.
25th May 2024 10:59 am
itsaguything
Member Since: 20 Dec 2023
Location: Manotick, On
Posts: 245
I have no quarrel with the shape of the roof line.
Walk in to any Thule shop and source the screw.2015 LR4 HSE Lux Aintree Green
2013 LR2 HSE Radiance Red
2007 XKR Jaguar Racing Green
2005 XJR Jaguar Racing Green
2002 S-Type R British Racing Green
25th May 2024 12:09 pm
Pete Hancock
Member Since: 11 Oct 2018
Location: Cornwall
Posts: 94
Thank You itsaguything.
I'm in UK.
So are the OEM (LR) roof bars made for LR by Thule ?
25th May 2024 12:59 pm
itsaguything
Member Since: 20 Dec 2023
Location: Manotick, On
Posts: 245
That or Yakima. I was looking for a part number for you... so far no luck.2015 LR4 HSE Lux Aintree Green
2013 LR2 HSE Radiance Red
2007 XKR Jaguar Racing Green
2005 XJR Jaguar Racing Green
2002 S-Type R British Racing Green
27th May 2024 1:21 am
Deejay K
Member Since: 23 Apr 2023
Location: Hampshire
Posts: 50
Hi Pete,
Like you I have replaced the original 3mm hex drive screws as they were getting chewed up. It is a countersunk m4/5 but I will check thread and length later today. I am sure I bought a handful at my local nuts and bolts supplier but will check if I have any leftover.
Dave
28th May 2024 7:25 am
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18558
From a search on here they are M5x12 countersunk.
You can get Torx variant if you want to reduce the risk of stripping the head.06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
28th May 2024 7:45 am
Deejay K
Member Since: 23 Apr 2023
Location: Hampshire
Posts: 50
Click image to enlarge
Correct Martin, with a 10mm countersunk head
I purchased mine used from a forum member and the threads were corroded so there was a lot of strain on the hex head. Dab of grease on the new ones and no issues so far.
28th May 2024 8:48 am
Pete Hancock
Member Since: 11 Oct 2018
Location: Cornwall
Posts: 94
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum