Member Since: 09 Dec 2023
Location: Yorkshire
Posts: 28
Air suspension - can't find the leak!
Just wondering what the more experienced folks' thoughts are on this.
I have a very obvious air leak at the front.
Sprayed soapy water but see nothing (though I might have not looked hard enough as it's been another quick "lunch break" check).
Both tyres are dropping which suggests valve block I think? But the leaking air noise is much louder at the front-left -- the wrong side for it to be valve block.
I'm thinking the most likely culprit is the front-left airbag and I just wasn't looking hard enough for the leak. Or is there anything else on that side that would loudly hiss air out in that way?
Furthermore, since both sides are dropping eventually, it would point to valve block too I think?
Thoughts?
Thanks
30th Jan 2024 3:51 pm
mulgrewgrew
Member Since: 09 Dec 2023
Location: Yorkshire
Posts: 28
Little update for closure:
Found the leak, hidden away at the lowest, most hidden part of the front-left airbag.
Now, replacement time
31st Jan 2024 5:26 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4456
Thought it would be, going down that quick. It's not too bad a job to do. Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
31st Jan 2024 6:12 pm
mulgrewgrew
Member Since: 09 Dec 2023
Location: Yorkshire
Posts: 28
I'm looking forward to getting the job done. Suspension problems fixed, and presumably not as difficult as my last job which was the park break shoes!
One final question:
Dunlop replacement (1 year warranty) or cheaper Chinese replacement (5 year warranty) ?
Chinese option is appealing due to price and warranty, but I wonder if it might affect the driving quality in some way?
Member Since: 09 Dec 2023
Location: Yorkshire
Posts: 28
Never mind, went with Dunlop.
Doubt the warranty for the Chinese one is worth the paper it's written on (if it's even written anywhere!)
31st Jan 2024 7:44 pm
loanrangie
Member Since: 18 Jun 2017
Location: Melbourne
Posts: 658
Should have gone with BWI, dunlop now made in china i believe and they are only slightly cheaper than the BWI OEM struts.
And you should do both as the other will be worn as well.
1st Feb 2024 2:37 am
mulgrewgrew
Member Since: 09 Dec 2023
Location: Yorkshire
Posts: 28
BWI also made in china. Would have preferred BWI but I found Dunlop available for a fair amount cheaper.
In an ideal world the replacement would be as a pair, yes.
1st Feb 2024 7:50 am
mulgrewgrew
Member Since: 09 Dec 2023
Location: Yorkshire
Posts: 28
However I can't find any clear indication that the air struts are definitely manufactured there. So I have emailed Dunlop directly to ask!
1st Feb 2024 8:12 am
mulgrewgrew
Member Since: 09 Dec 2023
Location: Yorkshire
Posts: 28
Response from Dunlop:
Quote:
Thanks for your enquiry.
We manufacture this Land Rover part here in Coventry (we were the OE supplier to JLR), now for the aftermarket.
Some components are sourced from our factories in China such as pistons, but all rubber for our OE programmes is produced here in Coventry.
I trust this helps.
From this, my understanding is that some parts are from China, but the assembly happens in Coventry, and rubber in particular is done here. Somewhat reassuring!
1st Feb 2024 3:36 pm
Nc1989
Member Since: 28 Apr 2015
Location: Doncaster
Posts: 208
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum