Member Since: 24 Aug 2020
Location: Dumfriesshire
Posts: 60
HP-Power Steering Pipes.
Whilst changing a Water Pump on a Vauxhall Corsa D., My SWMBO returned from transporting her Elderlys to get their COVID Vaccines in my 2014-D4 ....[this was her first time in it Solo].
Soon after I perchanced to notice a somewhat large pool of Oil developing underneath my D4.
This Oil has coated the Offside front underside along the metal plates and dripping all over the damned place. My first thoughts were of great worry and despair.
Though I could not initially do anything but glare at the mess whilst trying not to panic and hurriedly fixing said Corsa D so I could investigate further.....not that I wanted too really.
Anywho.....after investigating and realising it wasn't the Crank-seal etc, I found it to be the High Pressure pipes on the Steering Rack itself which have corroded and squirting fluid everywhere.
My Questions are....[at this early pre-repair stage]......
Is this something anyone has undertaken amongst us here on the forum and how easy a repair was it? And would anyone recommend a particular fluid to replenish the reservoir with?
I have looked on Advanced Factors site and do not see these pipes listed for sale....just the image below of the Rack Diagram.....which I have edited to highlight where the leak is coming from via the arrow and am wondering how they are attached at the other end as highlighted by the red circle?
Last edited by supersiecosse on 8th Feb 2021 6:37 pm. Edited 1 time in total
8th Feb 2021 6:16 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20841
The pipes are available as a repair section, though not from the dealer My D3 Build Thread
Member Since: 24 Aug 2020
Location: Dumfriesshire
Posts: 60
Quote:
Disco_Mikey
Post #2209016Posted: 8th Feb 2021 6:21 pm Post subject:
The pipes are available as a repair section, though not from the dealer Thumbs Up
Cheers fella.
Been online and bought said pipes. Have you any experience of this work and if so any pointers? It doesn't look to painful tho.
8th Feb 2021 10:19 pm
supersiecosse
Member Since: 24 Aug 2020
Location: Dumfriesshire
Posts: 60
Click image to enlarge
7/16ths.......FFS. Guess what I aint got!
Click image to enlarge
9th Feb 2021 3:09 pm
supersiecosse
Member Since: 24 Aug 2020
Location: Dumfriesshire
Posts: 60
New High Pressure pipes and 7/16ths Imperial Union Spanner....ready for the big fix tomorrow.
Click image to enlarge
11th Feb 2021 2:27 pm
Sylvester19
Member Since: 17 Jul 2020
Location: Central Scotland
Posts: 127
All down to cost, been made with kunifer, last the service life of the rack, Salt.... need to bleed the steering after fitting new pipes, usual way is to turn the steering from lock to lock, keep an eye on the reservoir, top up as necessary. Better if the front wheels are raised off the ground.
12th Feb 2021 2:16 am
Jonny100
Member Since: 14 Jan 2024
Location: Cumbria
Posts: 2
I have the same problem with corroded and leaking pipes, how easy was it to remove the old male unions? I’m afraid of stripping the heads and ending up in a right mess…..
14th Jan 2024 12:47 pm
supersiecosse
Member Since: 24 Aug 2020
Location: Dumfriesshire
Posts: 60
Snip the old pipe above the Unions so you can get good and proper purchase on them.Use a 7/16ths spanner.
Fit new pipe loosely at both ends of pump first....before nipping them up properly, with a 7/16ths Spanner.
The 7/16ths spanner is your friend in this operation. It is easy enough otherwise....just fiddly at times.
Good luck.
PS....if you do not have a 7/16ths spanner....Get one!
14th Jan 2024 1:28 pm
Jonny100
Member Since: 14 Jan 2024
Location: Cumbria
Posts: 2
That’s great thanks, it’s given me the confidence to go ahead and I’ll order up a 7/16 spanner for the job.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
....[this was her first time in it Solo].
