There's a members discount from Advance Factors with the code AF4LRP yµ (idµ - eAµ) ψ=mψ
27th Dec 2023 7:56 pm
rac060804
Member Since: 25 Jun 2018
Location: Tamworth
Posts: 67
Hi all
So, new compressor has been delivered and fitted……. No pinging with a yellow light - result
Apart from its soooooo slow when raising……any thoughts?? We have no fault codes
Cheers
5th Jan 2024 6:39 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4850
Genuine AMK, and did you replace the relay?yµ (idµ - eAµ) ψ=mψ
5th Jan 2024 6:48 pm
rac060804
Member Since: 25 Jun 2018
Location: Tamworth
Posts: 67
Sure is and yes replaced the Relay….
5th Jan 2024 6:53 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4850
If the reservoir was empty or low at the installation it will take time to replenish before it will fill the air bags.
Iower the suspension to access mode, then raise again to normal height and it should complete within a few seconds. If it takes longer there may be further issues at the valve blocks. Possibly detritus from the old compressor, (silicon beads) which breakdown over time and get past the filter blocking valves and airways.
Or, you have an air leak somewhere!!yµ (idµ - eAµ) ψ=mψ
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum