Member Since: 02 Jun 2015
Location: West coast
Posts: 50
Abs sensor wiring
So after replacing rear left sensor car wad okay for couple of days before all faults came back. Hdc , park brake etc etc .
Seeding on live data that alle sensors gives input except rear left.
Of all faults this stands out .
Click image to enlarge
I'm guessing a bad connection or broken wire someplace , but where to start looking ?
Rear connector seems ok , and rear left sensor does not go through the big multiplug like on D3 . Where to search next . Anyone has wiring diagram for the d4 ?
Both rear wires are yellow And there are several yellow and yellow/bl wires on the abs plug on the module in engine Bay.
Car is a My12 8 SPD sdv6
19th Dec 2023 4:53 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5061
Member Since: 02 Jun 2015
Location: West coast
Posts: 50
Great thanks .
20th Dec 2023 10:09 am
JL
Member Since: 02 Jun 2015
Location: West coast
Posts: 50
So fault came back over the holidays . Worsk for about 6km after restart then all faults . Give faults for both left and right , but when testing right seems okay. Tried changing the reluctor ring but it was to stuck so now I will try replacing the whole axl .
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum