Member Since: 18 Sep 2017
Location: On the NC500
Posts: 525
Best turbo supplier?
I’m going to have the twin turbos replaced as preventative maintenance. I’ve looked at the web and there are several suppliers of recon units, all about the same price. Does anyone have any suggestions as to the best suppliers? I’m not looking to buy cheap, I want the best quality I can get.
Any advice or direction is appreciated!!
22nd Sep 2023 8:52 am
Trailered Movements
Member Since: 16 Jan 2020
Location: East/West Sussex Coast Borders
Posts: 1200
Direct from Borg Warner.
Dave2011 Discovery 4 Commercial SDV6 (Gone)
2010 RRS TDV8 (Gone)
1980 OBLIC 4.0ltr Range Rover (went a long time ago)
22nd Sep 2023 9:05 am
NC500
Member Since: 18 Sep 2017
Location: On the NC500
Posts: 525
Looks promising but they are not exchange units - they recon the existing ones. My workshop won’t tie up a ramp waiting on a return on components.
22nd Sep 2023 10:00 am
Trailered Movements
Member Since: 16 Jan 2020
Location: East/West Sussex Coast Borders
Posts: 1200
I bought new, they didn't want mine in exchange although it was expected they would.
Dave2011 Discovery 4 Commercial SDV6 (Gone)
2010 RRS TDV8 (Gone)
1980 OBLIC 4.0ltr Range Rover (went a long time ago)
22nd Sep 2023 11:30 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20790
As above, brand new OE units.
There were supply issues not so long ago, no idea if they have been resolved, but I've checked with out supplier. Both sides are in stock My D3 Build Thread
Member Since: 18 Sep 2017
Location: On the NC500
Posts: 525
Thanks all - much appreciated.
22nd Sep 2023 1:27 pm
NC500
Member Since: 18 Sep 2017
Location: On the NC500
Posts: 525
Bought a pair from Garrett - original turbos remanufactured by Garrett themselves.
Click image to enlarge
13th Nov 2023 2:53 pm
disco chris
Member Since: 25 Apr 2022
Location: London
Posts: 263
Just out of interest and slightly off-topic but what's the thinking behind replacing the two turbos as preventative maintenance? Are they common failure points with catastrophic consequence? And what, if any, are signs of imminent failure?
I'd also be interested to know what kind of cost is involved in buying replacement units and getting them fitted. Mine (singular, as D3) has lasted 250k but it's on my mind as probably being on borrowed time.
Thanks
Chris.
13th Nov 2023 3:18 pm
NC500
Member Since: 18 Sep 2017
Location: On the NC500
Posts: 525
The most common issue is a sticking actuator on the secondary turbo- it’s either the actuator linkage seized (due to rust etc) or the actuator ring (inside turbo) stuck due to excessive carbon build up. Turbo bearings also fail if oil is too thin, or possibly oil starvation or oil contamination. If the seals in the turbo go completely, then the engine can over rev on its own oil, causing catastrophic engine failure.
Turbo failure symptoms are lack of power, excessive smoke from the exhaust and/or excessive oil consumption.
My truck has already done 160k and I need it to do another 160k so I am having a whole heap of preventative maintenance done on it requiring the body off. Rather than wait for a turbo to fail, I’m erring on the side of caution.
Two remanufactured turbos from Garrett are £2k plus VAT
13th Nov 2023 7:30 pm
disco chris
Member Since: 25 Apr 2022
Location: London
Posts: 263
Thanks NC500 for the reply. All good to know. Are you having any major work done to the engine itself as part of your preventative maintenance or sticking to frequent oil changes?
Thanks.
Chris
14th Nov 2023 11:45 am
NC500
Member Since: 18 Sep 2017
Location: On the NC500
Posts: 525
Nothing to the engine exactly but I am replacing:
Inlet manifolds
Oil separator crankcase breather
Both egr valves
Coolant crossover pipe
Fuel leak off pipe
Oil pump
Belts
Alternator
Turbo shut off valve
Intercooler hoses
These are all the weak areas that are prone to failure so at 10 years and 160k miles I thought it best to get ahead of any issues.
I’m also replacing:
Front and rear suspension arms
Air reservoir tank
Fuel tank guard
All four suspension struts
Both valve blocks
All height sensors
ARB bushes
All drop links
Earth strap
Fuel filter assembly
Engine oil and filter
Gearbox oil and filter
Coolant flush
Power steering flush
Inspect and replace brake lines and hoses
14th Nov 2023 12:29 pm
Tyty
Member Since: 18 Aug 2022
Location: South West
Posts: 77
Decent list,
Is it also worth replacing the oil level sender in the sump as these are also known to fail?
14th Nov 2023 5:06 pm
Lazydave
Member Since: 07 Jul 2019
Location: Birmingham
Posts: 87
Check egr metal pipes aswell as they corrode where the clip is fitted around the cover. Bolt snapped when changing ours resulting in body off.
2010 HSE
Full service genuine parts.
Front and rear pads.
Turbo oil drain pipe mod.
LED interior lights upgrade.
Both rear door actuators.
Tailgate handle/ switch.
Facelift grille and rear lights.
Fitted cross bars.
New rear discs and pads.
New RH inlet manifold.
New air con condensor.
New battery.
New EGR pipe.
New front discs and pads.
New propshaft.
Last edited by Lazydave on 14th Nov 2023 10:01 pm. Edited 1 time in total
14th Nov 2023 9:57 pm
Lazydave
Member Since: 07 Jul 2019
Location: Birmingham
Posts: 87
Click image to enlarge
2010 HSE
Full service genuine parts.
Front and rear pads.
Turbo oil drain pipe mod.
LED interior lights upgrade.
Both rear door actuators.
Tailgate handle/ switch.
Facelift grille and rear lights.
Fitted cross bars.
New rear discs and pads.
New RH inlet manifold.
New air con condensor.
New battery.
New EGR pipe.
New front discs and pads.
New propshaft.
14th Nov 2023 10:00 pm
NC500
Member Since: 18 Sep 2017
Location: On the NC500
Posts: 525
Thanks for additional guidance - much appreciated!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum