Member Since: 21 Dec 2021
Location: Bedfordshire
Posts: 90
Diamond Cut refurb's corroding..
Had the wheels on our HSE LUX refurbed when we purchased it 15 months ago. They had bad curb damage on each wheel, so we paid to have them refurb'd before taking delivery. To be fair we were advised to consider going all Black on them, but missus preferred the original Diamond cut style..
They are now corroding already under the lacquer, with no sign of breaks in the coating.
Just checking if this is normal for the LR wheels of this model or not, before I try and get them redone, though most refurb places only warrant them for 6 months, which I guess says it all..
D4 HSE Lux. my 2015 . Mariana Black
9th Jun 2023 9:16 am
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4470
Wheel refurbs are never as good as they were originally. A lot of wheel painters will use a wet paint colour and a powder lacquer, and I'm not convinced powder coating is as good as the original wet spray lacquer.Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
9th Jun 2023 9:44 am
riverblanche
Member Since: 31 Aug 2010
Location: retford'ish
Posts: 2216
Hi,
our old RRS 494 had DC and dealer refurbed them when we bought it at 3 years old
before 12 months was up they had the car back and did them all again at a different place
sadly for them they forgot about the full size spare wheel and the 2nd refurb was a slight different colour to the last,
so they had to pick up the spare and then get that done
when we sold it about a year later there were signs again starting to show
Member Since: 21 Dec 2021
Location: Bedfordshire
Posts: 90
Thanks guys,,
Had a local quote to have them painted black.. £100+vat a corner...
I am hoping the guys that did the original DC refurb may come back and do us a deal to do them in Black..D4 HSE Lux. my 2015 . Mariana Black
9th Jun 2023 6:06 pm
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4208
I bought a set of diamond cut and had them painted black for exactly that reason, they all seem to corrode under the lacquer after around 12 months or so. At least with them being black you can easily retouch them if needs be...
I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
9th Jun 2023 8:39 pm
J@mes
Member Since: 10 Nov 2008
Location: Bomber County
Posts: 4547
Mine look terrible but they were refurbished 4 years ago.
I'm going to speak to my local place and see if they can replicate the look using black and a high sparkle silver for the spokes rather than diamond cutting them.2014 D4 XS
2005 D3 SE - Gone
9th Jun 2023 9:20 pm
PJ D4
Member Since: 06 Apr 2022
Location: Northants
Posts: 40
Just had my HSE Lux rims powder coated in satin black. IMO diamond cut rims are a nightmare and always corrode. As the car is black its full stealth mode now!
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
27th Sep 2023 9:37 pm
PJ D4
Member Since: 06 Apr 2022
Location: Northants
Posts: 40
Standby Hardware..
Just need to figure out how to upload a photo...
27th Sep 2023 10:19 pm
PJ D4
Member Since: 06 Apr 2022
Location: Northants
Posts: 40
Boom! figured it out!
Click image to enlarge
27th Sep 2023 10:24 pm
disco32009
Member Since: 12 Oct 2009
Location: worcestershire
Posts: 295
Member Since: 02 Jun 2016
Location: Hertfordshire
Posts: 2154
Looking good PJ Uncle Ray's spare wheel protector
Limo Tint
Blackvue front & rear dashcam
Cruise control switch pack
Bodsy's remote for FBH
29th Sep 2023 12:37 pm
James W
Member Since: 27 Mar 2008
Location: Riyadh, KSA
Posts: 3077
Mine were done by the dealer to sort out some light kerbing. 2+ years later and there's a little bit of white 'worm marks' starting to show. My research shows it just happens on diamond cut. I have also been told they milled off so much to get the kerbing out I can't have it done again. In a couple more years I will simply spray mine the right shade of grey/silver and then just keep them tidy that way, touching up as required.D4 XS, gone, much loved, never forgotten
2018 FFRR SDV8 Autobiography - Gone to someone with less sense and more time to enjoy it
2016 Toyota Hilux Invincible - Liberating experience
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum