I got hold of a boot divider through a good member of the forum. (Thanks Nige) Due to a certain delivery company who shall remain nameless (Evri). It finally arrived in a battered condition after a loooooong time. It’s has sadly lost some bits it transit. Does any one have some good photos and or measurements of the foot and it there anything that goes on the top?
This is the only picture I could find of the foot
Steve
23rd May 2023 9:01 pm
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2863
its an 8 cm x 5 cm x 3mm plate at the base with a 5mm foam pad
The plate has a welded tube on top with threaded insert
No problem, hope it helps! let me know if you need pics of the other bits
If you have any pictures of the top bit. That would be good. I have a curved bit welded on , so I suspect I need a bit of foam or rubber to go in that.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum