Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO3.CO.UK > Maintenance & Mods (D3)

LR luggage divider - question
Post Reply  Down to end
Page 1 of 1
NCC-1031
 


Member Since: 30 Jan 2019
Location: Clanfield, Hampshire
Posts: 378

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Vienna GreenDiscovery 3
LR luggage divider - question

Hi all.

I got hold of a boot divider through a good member of the forum. (Thanks Nige) Due to a certain delivery company who shall remain nameless (Evri). It finally arrived in a battered condition after a loooooong time. It’s has sadly lost some bits it transit. Does any one have some good photos and or measurements of the foot and it there anything that goes on the top?





This is the only picture I could find of the foot


Steve  
Post #233753023rd May 2023 9:01 pm
View user's profile Send private message View poster's gallery Reply with quote
darrind
 


Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2863

England 2013 Discovery 4 3.0 SDV6 HSE Auto Santorini BlackDiscovery 4

its an 8 cm x 5 cm x 3mm plate at the base with a 5mm foam pad

The plate has a welded tube on top with threaded insert


 Must stop buying shiny toys....  
Post #233753123rd May 2023 9:25 pm
View user's profile Send private message View poster's gallery Reply with quote
NCC-1031
 


Member Since: 30 Jan 2019
Location: Clanfield, Hampshire
Posts: 378

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Vienna GreenDiscovery 3

Brilliant. Thanks

Was there anything that goes in the top of the divider? Or should the foot be adjusted so that the curve on the divider touches the car roof?

Steve  
Post #233753323rd May 2023 9:45 pm
View user's profile Send private message View poster's gallery Reply with quote
darrind
 


Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2863

England 2013 Discovery 4 3.0 SDV6 HSE Auto Santorini BlackDiscovery 4

Should be a plate on the top of the divider that has a foam pad on it that pushes against the roof.

Don't have any calibers here but here's some pictures of the foot.












 Must stop buying shiny toys....  
Post #233753723rd May 2023 10:08 pm
View user's profile Send private message View poster's gallery Reply with quote
NCC-1031
 


Member Since: 30 Jan 2019
Location: Clanfield, Hampshire
Posts: 378

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Vienna GreenDiscovery 3

Wow. Such detail. Thank you

I have a fighting chance to make this now

S  
Post #233754023rd May 2023 10:36 pm
View user's profile Send private message View poster's gallery Reply with quote
darrind
 


Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2863

England 2013 Discovery 4 3.0 SDV6 HSE Auto Santorini BlackDiscovery 4

No problem, hope it helps! let me know if you need pics of the other bits Thumbs Up Thumbs Up Must stop buying shiny toys....  
Post #233754323rd May 2023 10:59 pm
View user's profile Send private message View poster's gallery Reply with quote
darrind
 


Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2863

England 2013 Discovery 4 3.0 SDV6 HSE Auto Santorini BlackDiscovery 4

Instructions if you need them -

https://www.disco3.co.uk/gallery/albums/us...500040.pdf Must stop buying shiny toys....  
Post #233754423rd May 2023 11:06 pm
View user's profile Send private message View poster's gallery Reply with quote
NCC-1031
 


Member Since: 30 Jan 2019
Location: Clanfield, Hampshire
Posts: 378

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Vienna GreenDiscovery 3

Wow. Also brilliant. So I’m missing two screw things for the door. But I’m not using that at the moment so can source them later.

Thanks.  
Post #233754723rd May 2023 11:21 pm
View user's profile Send private message View poster's gallery Reply with quote
NCC-1031
 


Member Since: 30 Jan 2019
Location: Clanfield, Hampshire
Posts: 378

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Vienna GreenDiscovery 3

darrind wrote:
No problem, hope it helps! let me know if you need pics of the other bits Thumbs Up Thumbs Up


If you have any pictures of the top bit. That would be good. I have a curved bit welded on , so I suspect I need a bit of foam or rubber to go in that.

Steve  
Post #233754823rd May 2023 11:23 pm
View user's profile Send private message View poster's gallery Reply with quote
NJSS
 


Member Since: 06 May 2009
Location: Catherington, Hampshire.
Posts: 10637

United Kingdom 2016 Discovery 4 3.0 SDV6 Landmark LE Auto Waitomo GreyDiscovery 4

Steve

I have PM'ed you.

Regards

Nigel  
Post #233756224th May 2023 8:30 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site