Member Since: 20 Aug 2019
Location: Stafford
Posts: 13
Cruise control and other acc not activating with IID tool
Two days ago I received my new IID Tool. And was very excited to finally sort out a few issues namely the EPB, now fixed, turning off of the irritating pinging of the key in alarm (Won’t deactivate) turning on the clock within the vehicle display (working) activating the 3 flash on the indicators (working) however I now seem to have hit a wall with the cruise control.
I have set the steering controls to resistive 1.
Set the cruise control to fitted.
All through the mobile app.
I believe the cruise control buttons are working as I can also use them to interact with the IID tool and have tested to ensure the cruise control light illuminates.
So is there something else that I need to be doing?
7th Mar 2020 4:40 pm
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3170
Do you have the correct brake light switch not sure if there are any differences in them but may be worth checking Discovery 3 se gone
Range rover sport supercharged here:)
7th Mar 2020 4:52 pm
Lee-Howdle
Member Since: 20 Aug 2019
Location: Stafford
Posts: 13
Interesting I wasn’t even aware that there were different brake light switches. I should’ve mentioned that my vehicle is a base model seven seat. I guess I will have to check this outI now have a IID tool if anyone needs some assistance around the Stafford area.
7th Mar 2020 4:56 pm
Lee-Howdle
Member Since: 20 Aug 2019
Location: Stafford
Posts: 13
I’ve just had a look on AF and they only Reference to 3 brake light switches one for an automatic genuine one for a manual genuine and their own universal which fits both manual and automaticI now have a IID tool if anyone needs some assistance around the Stafford area.
7th Mar 2020 5:11 pm
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3170
They may be the same but the brake also cute out cruise ans i could see you had the base model so not sure but worth a little look Discovery 3 se gone
Range rover sport supercharged here:)
7th Mar 2020 5:13 pm
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3170
If its a base model you must have bought the switches and loom the loom has a common problem of the wires breaking inside the coating also worth checking Discovery 3 se gone
Range rover sport supercharged here:)
7th Mar 2020 5:15 pm
Lee-Howdle
Member Since: 20 Aug 2019
Location: Stafford
Posts: 13
Yeah definitely worth a look, I’ve still got the old loom so I can test it but I’m pretty sure that it is working as I could scroll through the settings with the IID tool pluggedI now have a IID tool if anyone needs some assistance around the Stafford area.
7th Mar 2020 5:31 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20856
I've seen this issue before, but can't remember the outcome My D3 Build Thread
Member Since: 20 Aug 2019
Location: Stafford
Posts: 13
Strangely today the cruise control is now working. I have no idea what the glitch was but after repeatedly pressing the buttons (out of annoyance of it not working more than anything) it decided it was going to work, so I will accept this as a win I now have a IID tool if anyone needs some assistance around the Stafford area.
9th Mar 2020 3:58 pm
CRV Man
Member Since: 24 Feb 2013
Location: Hexham Northumberland
Posts: 40
Hi I was told you leave the car locked for a bout 1/2 hour after using the tool (gap)
and it resets the cpu and it works👍
15th Mar 2020 9:43 pm
Lee-Howdle
Member Since: 20 Aug 2019
Location: Stafford
Posts: 13
Yep I think I read that bit eventually 9 times out of 10 it’s always user Error I now have a IID tool if anyone needs some assistance around the Stafford area.
It helps to wait till the car goes to sleep, some work striaght off and others need to sleep before they work..
Flack
17th Mar 2020 2:09 pm
D3White Night
Member Since: 03 Jul 2017
Location: Huthwaite
Posts: 71
Re: Cruise control and other acc not activating with IID tool
Lee-Howdle wrote:
Two days ago I received my new IID Tool. And was very excited to finally sort out a few issues namely the EPB, now fixed, turning off of the irritating pinging of the key in alarm (Won’t deactivate) turning on the clock within the vehicle display (working) activating the 3 flash on the indicators (working) however I now seem to have hit a wall with the cruise control.
I have set the steering controls to resistive 1.
Set the cruise control to fitted.
All through the mobile app.
I believe the cruise control buttons are working as I can also use them to interact with the IID tool and have tested to ensure the cruise control light illuminates.
So is there something else that I need to be doing?
I have the same problem.
My IIDControl doesn’t see it, nothing in the ECU but....
It works
No problems with it. It does as it should just, the Gap tool doesn’t see it at all
28th Jun 2020 9:53 pm
Electron Greg
Member Since: 24 Jan 2023
Location: Leicester
Posts: 13
Enable Cruise Control - retrofitted CC steering wheel
I've bought myself the IID Tool, created an account, linked to the VIN of my D3 and gone through many settings/options. Found two likely options in "Instrument Pack", one referring to CC and the other Cruise Control. Neither will allow to be enabled.
I'm very new to this area of DIY. Any guidance from previous experience?
27th Jan 2023 5:43 pm
Electron Greg
Member Since: 24 Jan 2023
Location: Leicester
Posts: 13
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
