Lenny1974
Member Since: 10 May 2020
Location: Bristol
Posts: 70
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 HSE Auto Buckingham Blue 2005 Discovery 3 TDV6 HSE Auto Buckingham Blue](../images/veh/buckingham_blue.gif)
|
Steering angle sensor calibration - lights on dash |
|
So, I recently replaced the front upper and lower arms due to knocking when driving over bumps. I then got the wheel alignment done and all ok. However, when I checked the steering wheel angle sensor reading, it was showing about 8deg delta from what I thought was straight on.. so I did reset and now the dash is all lit up with 3 Amber lights. Now, assume I got 2 options, go back to wheel alignment place and get tie rods adjusted or try to angle the steering back to where it was and resetting ? I should have just left it, but thought I was doing the right thing.......any advice appreciated. Its due an MOT in January and know it will fail unless I get it sorted.
|
15th Dec 2022 5:28 pm |
|
|
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2863
![](templates/vbnew/images/spacer.gif)
![2013 Discovery 4 3.0 SDV6 HSE Auto Santorini Black 2013 Discovery 4 3.0 SDV6 HSE Auto Santorini Black](../images/veh/santorini_black.gif)
|
What are you using to do the reset of the steering angle sensor? if its an IID take a look at the readings as you turn the wheel, as the ring might have worked loose Must stop buying shiny toys....
|
15th Dec 2022 6:34 pm |
|
|
Lenny1974
Member Since: 10 May 2020
Location: Bristol
Posts: 70
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 HSE Auto Buckingham Blue 2005 Discovery 3 TDV6 HSE Auto Buckingham Blue](../images/veh/buckingham_blue.gif)
|
I was using my icarsoft tool to check. I lined up the steering wheel and reset. It's now reading 0 and changes angle in accordance with how I rotate it. So I know its getting a reading. I just wonder if It needs some additional input or calibration. Seems a bit odd to me.
|
15th Dec 2022 6:42 pm |
|
|