AndyPembs
Member Since: 03 Aug 2022
Location: Wokingham
Posts: 69
  
|
| "Check battery and fuel" error |
|
This morning was a bit chilly... Turned on the ignition in my D4 and got an error message which read something like "Check battery and fuel level" - all in connection with the FBH.
Plenty of fuel, and no problem with the battery.
Thoughts, anyone?
|
 6th Dec 2022 9:01 pm |
|
|
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6402
 
|
why do you think no problem with battery?
it might have degraded that its state of capacity is crap although it might show OK voltage ...
can you read DTCs?
G
|
| 7th Dec 2022 9:39 am |
|
|
AndyPembs
Member Since: 03 Aug 2022
Location: Wokingham
Posts: 69
|
It's reading 12.6......
|
| 7th Dec 2022 8:42 pm |
|
|
Hardware
Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 13018
|
My FBH doesn't like volts below 12.4 -
I changed battery earlier this year to prevent this being an issue this winter, but it hasn't improved the situation. .
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer  ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
|
| 7th Dec 2022 9:01 pm |
|
|
Flatlander
Member Since: 20 Jul 2015
Location: Here
Posts: 575
|
I've seen quite a few FBH with low voltage errors due to either a corroded fuse or high resistance in the wiring, the first one can sometimes be only cured with a new fuse temporarily if the contacts in the BJB are corroded also. A first time fix is to run a new supply from the battery terminal via a 10A in line fuse directly to the FBH connector.
|
| 7th Dec 2022 10:03 pm |
|
|
