- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
davecars
Member Since: 04 Feb 2012
Location: Scotland
Posts: 166
  
|
Hi All
D4 2010, activated timed climate control with gapIID, on screen, in vehicle settings, next to valet shows the timer settings, small problem (I Hope), the manual on/off is greyed out and can not be activated, outside temp is 6C, I was under the impression that as long as the temp was no higher than 10C you could use the manual option ?
Anyone ? Discovery 3 SE gone but not forgotten.
Discovery 4 HSE (Mrs S)
Discovery 3 GS project, great, but manual, Gone.
Discovery 4 XS
|
 1st Dec 2022 6:24 pm |
|
|
LRkarlak
Member Since: 21 Dec 2021
Location: Bedfordshire
Posts: 90
 
|
On ours to get the manual option to work, engine and ignition off. Switch on the radio. Go to the climate screen and then the manual heat option is available. Give it a press, then the FBH starts. D4 HSE Lux. my 2015 . Mariana Black
|
| 1st Dec 2022 7:45 pm |
|
|
Skagg
Member Since: 15 May 2015
Location: Not where i'd like to be
Posts: 1043
|
+1  MY16 D4 Landmark SDV6 (The Ice Maiden)
Uncle Ray's spare wheel protector
MY08 D3 HSE Stornoway (Miss Moneypit) The money tree withered......
|
| 1st Dec 2022 8:14 pm |
|
|
davecars
Member Since: 04 Feb 2012
Location: Scotland
Posts: 166
|
LRkarlak wrote:On ours to get the manual option to work, engine and ignition off. Switch on the radio. Go to the climate screen and then the manual heat option is available. Give it a press, then the FBH starts.
This forum is wonderful, thank you LRkarlak and Skagg, just tried, as described, all working as it should, again thank you.
👍 Discovery 3 SE gone but not forgotten.
Discovery 4 HSE (Mrs S)
Discovery 3 GS project, great, but manual, Gone.
Discovery 4 XS
Last edited by davecars on 2nd Dec 2022 11:14 am. Edited 2 times in total
|
| 1st Dec 2022 9:05 pm |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8227
 
|
What happens when the engine is started?- does it go off and then controlled by the engine?
p.s. I got no heating at the moment and don’t I miss it  It can when others can't,
It will when others won't,
It goes where others don't.
|
| 2nd Dec 2022 8:10 am |
|
|
Shamrock
Member Since: 16 Jun 2022
Location: South Kerry
Posts: 114
|
LRkarlak wrote:engine and ignition off. Switch on the radio.
Perhaps I missed something, but how can you set the radio ON with ignition OFF ? 
|
| 2nd Dec 2022 9:46 am |
|
|
Hardware
Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 13018
|
This may be a shock but ... press the "on" button !  .
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer  ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
|
| 2nd Dec 2022 9:54 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10682
 
|
I guess it’s the button in the middle of the volume knob.
I don’t have a D4
|
| 2nd Dec 2022 12:48 pm |
|
|
Shamrock
Member Since: 16 Jun 2022
Location: South Kerry
Posts: 114
|
Hardware wrote:This may be a shock but ... press the "on" button !
It works !!! 
That's crazy ! It's now 8 months I've bought my D4 and I discover each day new things on it !
That's why I love this car 
Thanks a million for that tip
|
| 2nd Dec 2022 3:20 pm |
|
|
Shamrock
Member Since: 16 Jun 2022
Location: South Kerry
Posts: 114
|
I come back on this thread because something's not working as expected...
My FBH works perfectly for 30 mn when using the timed climate, but when I use the "manual heating" button, it starts and stop quite immediately. Any idea ?
Edit : I can succesfuly use the Thermo Test software to run the FBH. But... after the test, I have to reset the FBH (by removing supply plug for a minute) to be able to restart another test, otherwise the communication with W-bus doesn't start !
Also, I need to proceed this reset before to start the FBH with a remote and converter, and then it works only for a short time like with the "manual heating" button.
I'm suspecting a misunderstanding in the settings "auxiliary heater" and "parking heater" in the CCF file... To be continued.
|
| 8th Dec 2022 11:56 am |
|
|
davecars
Member Since: 04 Feb 2012
Location: Scotland
Posts: 166
|
Hi Shamrock
Did you get an answer to the problem, one of my friends has the same problem ? When using manual runs for a few min then stops, thanks. Discovery 3 SE gone but not forgotten.
Discovery 4 HSE (Mrs S)
Discovery 3 GS project, great, but manual, Gone.
Discovery 4 XS
|
| 12th Dec 2022 9:28 pm |
|
|
Shamrock
Member Since: 16 Jun 2022
Location: South Kerry
Posts: 114
|
Hi davecars !
Unfortunately, I still have no explication for this fail.
I don't incriminate the converter because I have the same problem with the touch screen button as with the (remote controlled) converter. The heater starts venting, "auto" light in the car starts flashing, but after a while (around 1 min), the heater shuts down.
I can't incriminate the W-bus, as it works perfectly with the Thermo Test software (v2.14) threw the diagnostic cable.
Is it working on YOUR car ? If yes, what could be the difference ? What are your settings in CCF ?
Keep in touch, I keep on searching...
The converter is : https://www.ebay.ie/itm/334055699526
With remote : https://www.ebay.ie/itm/334172103471
The diagnostic cable is : https://www.ebay.ie/itm/334172075453
|
| 13th Dec 2022 9:38 am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
