Member Since: 20 May 2013
Location: Devon
Posts: 91
Brembo brakes
Hi guys
So my rear brake is basically and churning aluminium dust over my alloys and I’ve been told I’m going to need to replace the whole rear brakes - discs pads and callipers with motors.
Got me thinking if I was thinking of changing them in years to come for Brembos, is it worth doing that now and are they good and or easy enough to just do a straight swap out for?
Or are they more a front brake and the rears are best left.
2nd Dec 2022 4:37 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4522
Callipers with motors? Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
2nd Dec 2022 7:17 pm
JonM
Member Since: 24 May 2012
Location: North Yorkshire
Posts: 1247
I suspect a typo - rotors makes more sense.
The brakes on the D5 are very good. I see no advantage in changing from standard except the cost of OEM parts.MY2022 D5 HSE D300 - with extra nice bits added
MY2019 D5 HSE 3.0 SDV6 - sold to a dealer for a crazy price! - So good I bought another!
MY2012 D4 HSE 3.0 SDV6 - retired to a new home
2nd Dec 2022 7:20 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4522
OP already said discs and pads, then 'callipers with motors'?Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
2nd Dec 2022 7:22 pm
Flatlander
Member Since: 20 Jul 2015
Location: Here
Posts: 575
The EPB is an electric motor mounted on the brake caliper, one per side. It'd be unusual to need the motors replacing as well as the calipers.
2nd Dec 2022 7:33 pm
JonM
Member Since: 24 May 2012
Location: North Yorkshire
Posts: 1247
I suppose it does actually make sense. The EPB on the D5 is built in to each rear caliper as some sort of motor that applies the pads to the disc (it's not a drum brake like the D3/4).MY2022 D5 HSE D300 - with extra nice bits added
MY2019 D5 HSE 3.0 SDV6 - sold to a dealer for a crazy price! - So good I bought another!
MY2012 D4 HSE 3.0 SDV6 - retired to a new home
2nd Dec 2022 7:34 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4522
OK, I fell foul of the OP's profile!Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
2nd Dec 2022 7:40 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4522
D5! even though profile says D3 Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
2nd Dec 2022 7:41 pm
Flatlander
Member Since: 20 Jul 2015
Location: Here
Posts: 575
It makes sense because that's how it is!
I'd be interested in how the diagnosis of 'replace everything' was reached, metal dust on the wheels indicates something is touching a moving part that it shouldn't be touching, without photos I wouldn't want to make a guess, informed or otherwise, it does sound like someone is covering all eventualities though.
2nd Dec 2022 7:45 pm
Xternalhunter
Member Since: 20 May 2013
Location: Devon
Posts: 91
Cheers guys. I mentioned in my past post I’d tried to update it from D3 but for some reason it doesn’t save and I can’t see a D5 option there. Sorry for that but posted it in D5.
Yes was told needed motors too, don’t distrust the guy at all but I did take pics so happy to share on here anyway. I do need a second opinion as the guys I bought from are refusing to pay, I’ve only swapped the d3 for d5 7 weeks ago so very large bill already sadly.
I think the argument was if the disc was rubbing and epb/calliper ceasing it could have distorted and become dangerous? Obviously can’t change one side without another either D3 - moved on
D5 SD4 HSE gunmetal with black pack
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
and churning aluminium dust over my alloys and I’ve been told I’m going to need to replace the whole rear brakes - discs pads and callipers with motors.
