Lazylen
Member Since: 03 Sep 2018
Location: Rochford
Posts: 44
|
Plastic Housing behind N/S Rear wheel |
|
Afternoon all.
Wondered if I could pick your brains.
2006 D3 HSE Auto (UK)
Was doing some maintenance around the back end at the weekend and came across the plastic housing just behind the N/S rear wheel that has the 2 multuplug connectors attached to it but it all looked very open and did not look like it was protecting the wiring from spray and debris. It had the flat bottom piece attached to the chassis rail and the connectors attached to that all OK but then a loose flappy piece thats just floating about not enclosing anything. This didn't seem normal to me. I've spent a fair bit of time searching on here and on the Internet trying to find a picture or part number of that particular part to see whats missing.
My question is, do any of you clever people know the part number for this piece or a picture of the part as it should look.
Thanks in advance
Len
|
2nd Nov 2022 3:43 pm |
|
|
SteveNorman
Member Since: 14 Oct 2005
Location: Somerset
Posts: 1145
|
Hi Len,
I assume you are talking about the wiring cover AHU780300
This is now no longer available. but you can just use a cable tie to hold it in place.
It doesn't do a very good job anyway, as water can get both sides of it.
regards
Steve
|
2nd Nov 2022 4:38 pm |
|
|
Lazylen
Member Since: 03 Sep 2018
Location: Rochford
Posts: 44
|
Thank you Steve, yes, thats the bit. I can see that mine is complete although it looks like half of it is missing. Like you say, I'll use cable ties to tidy it up a bit.
Thanks again 👍
|
2nd Nov 2022 5:43 pm |
|
|