Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Maintenance & Mods (D4)

Coolant Warning - float failing ?
Post Reply  Down to end
Page 3 of 4 <1234>
Hardware
 


Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 13017

United Kingdom 2011 Discovery 4 3.0 SDV6 XS Auto Sumatra BlackDiscovery 4

TBH, I've thought about getting some ever since Flack did the 7yr service on the car but never had opportunity to buy them in advance of needing them before ... would have been very handy fixing my dad's washing machine 2 weeks ago!

And thinking about it ... Flack doing the service may have been the last time the antifreeze was changed, so Joe may be on to something as that was 5 years ago and the stuff has a 5 year lifespan !
  
Post #23144059th Nov 2022 5:44 pm
View user's profile Send private message View poster's gallery Reply with quote
M3DPO
 


Member Since: 22 Sep 2010
Location: Notts.
Posts: 8225

England 2014 Discovery 4 3.0 SDV6 HSE Lux Auto Corris GreyDiscovery 4

I feel a group buy coming on Laughing
 It can when others can't,
It will when others won't,
It goes where others don't. 
 
Post #23144079th Nov 2022 6:29 pm
View user's profile Send private message View poster's gallery Reply with quote
Hardware
 


Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 13017

United Kingdom 2011 Discovery 4 3.0 SDV6 XS Auto Sumatra BlackDiscovery 4

Well ... the Silverline brand Antifreeze tester tells me that my mix is too strong !

Think I'll get a second opinion on that !
  
Post #231468711th Nov 2022 9:03 pm
View user's profile Send private message View poster's gallery Reply with quote
Hardware
 


Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 13017

United Kingdom 2011 Discovery 4 3.0 SDV6 XS Auto Sumatra BlackDiscovery 4

ok ... 2nd opinion on the mix strength showed it as max strength, so not doing anything about that.

and the warning light came on once more, in Christmas week, so I was ignoring that too.

However, as car is booked in for MoT on Friday, the warning light has decided to become active again for last 3 days.

Is it an MoT fail ? if so, can I short out the sensor to prevent it coming on during the test ?
  
Post #232304617th Jan 2023 9:20 am
View user's profile Send private message View poster's gallery Reply with quote
M3DPO
 


Member Since: 22 Sep 2010
Location: Notts.
Posts: 8225

England 2014 Discovery 4 3.0 SDV6 HSE Lux Auto Corris GreyDiscovery 4

Yes it can be bridged out, remove headlamp and grill and you can pull the plug out and bridge the wires on the plug, if it is still coming on you have a problem with the wires not the sensor.
One of these cured mine, comes complete with sensor and filler cap, if you decide to change the bottle [b]clamp the bottom pipe to save losing your antifreeze [/b.

 It can when others can't,
It will when others won't,
It goes where others don't. 
 
Post #232305517th Jan 2023 9:58 am
View user's profile Send private message View poster's gallery Reply with quote
Hardware
 


Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 13017

United Kingdom 2011 Discovery 4 3.0 SDV6 XS Auto Sumatra BlackDiscovery 4

đź‘Ť
 .


Dean
====================================

2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer Sad ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms 
 
Post #232306117th Jan 2023 10:45 am
View user's profile Send private message View poster's gallery Reply with quote
Hardware
 


Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 13017

United Kingdom 2011 Discovery 4 3.0 SDV6 XS Auto Sumatra BlackDiscovery 4

Hard to get a pic, but is this it?

It's proving to be a swine to unplug and even if I succeed, I'm not sure there is enough slack to get to it to short it.
 .


Dean
====================================

2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer Sad ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms 
 
Post #232319518th Jan 2023 1:47 pm
View user's profile Send private message View poster's gallery Reply with quote
Hardware
 


Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 13017

United Kingdom 2011 Discovery 4 3.0 SDV6 XS Auto Sumatra BlackDiscovery 4

M3DPO wrote:


Cheers, found it from same seller ... gone up ÂŁ5 though (no idea what JLR price would be)

given you found that price yesterday, did it go up because we both looked ?
  
Post #232320118th Jan 2023 2:32 pm
View user's profile Send private message View poster's gallery Reply with quote
M3DPO
 


Member Since: 22 Sep 2010
Location: Notts.
Posts: 8225

England 2014 Discovery 4 3.0 SDV6 HSE Lux Auto Corris GreyDiscovery 4

My price and photo was from about 5 weeks ago!- note how many has been purchased.
There is a wire “u” shaped clip that locks the plug in place, I used a pair of long nosed pliers to pull the clip out. Take the lamp unit out, lift the PS bottle out, unclip and lift the screen wash filler pipe out, take the two studs out that hold the bottle in position and lift it up to gain access from underneath.


 It can when others can't,
It will when others won't,
It goes where others don't. 
 
Post #232320318th Jan 2023 2:51 pm
View user's profile Send private message View poster's gallery Reply with quote
Hardware
 


Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 13017

United Kingdom 2011 Discovery 4 3.0 SDV6 XS Auto Sumatra BlackDiscovery 4

cheers.
  
Post #232321618th Jan 2023 4:48 pm
View user's profile Send private message View poster's gallery Reply with quote
Hardware
 


Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 13017

United Kingdom 2011 Discovery 4 3.0 SDV6 XS Auto Sumatra BlackDiscovery 4

Well ... passed MoT with advisory that a brake pipe " covered or corroded " and, oddly, a number plate lamp out.

I say oddly as I only changed it on Tuesday and it was/is an LED. There does look to be condensation in that unit and the one I put in today is much less bright than the RH one, which is at least 2 years old.

Might have to pull it all apart and get the hairdryer on it?
 .


Dean
====================================

2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer Sad ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms 
 
Post #232348120th Jan 2023 3:05 pm
View user's profile Send private message View poster's gallery Reply with quote
M3DPO
 


Member Since: 22 Sep 2010
Location: Notts.
Posts: 8225

England 2014 Discovery 4 3.0 SDV6 HSE Lux Auto Corris GreyDiscovery 4

My old D3 failed for the same reason, number plate bulb, main dealer wanted £60 to change it Shocked, as it is a 30 mile round trip to main dealer I told them to do it, I got a phone call 5 minutes later to say they wouldn’t do it as it was a none standard bulb Big Cry
 It can when others can't,
It will when others won't,
It goes where others don't. 
 
Post #232349420th Jan 2023 5:26 pm
View user's profile Send private message View poster's gallery Reply with quote
Pedros
 


Member Since: 25 Jun 2011
Location: Cumbria
Posts: 454

United Kingdom 2010 Discovery 4 3.0 TDV6 XS Auto Santorini BlackDiscovery 4

When it got really cold my coolant low warning started to trigger in the mornings. But not when a bit warmer. It didn't look too devoid of coolant when I checked although I did top it up a bit. I just wondered whether something gets a bit sticky somewhere when things dive below freezing.
  
Post #232360521st Jan 2023 6:24 pm
View user's profile Send private message View poster's gallery Reply with quote
Hardware
 


Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 13017

United Kingdom 2011 Discovery 4 3.0 SDV6 XS Auto Sumatra BlackDiscovery 4

Well .... replacement expansion tank fitted today and it's STILL saying "low coolant".

My mechanic is suggesting it's a wiring issue - he normally takes a dislike to the parts when I supply them but he says this tank looks good to him.
  
Post #234056927th Jun 2023 1:57 pm
View user's profile Send private message View poster's gallery Reply with quote
Davethegeo
 


Member Since: 01 Oct 2015
Location: Edinburgh
Posts: 912

Scotland 2014 Discovery 4 3.0 SDV6 HSE Auto Corris GreyDiscovery 4

I had the coolant warning and finally decided to stop ignoring it. Bought a new expansion tank complete with sensor from ebay.
It's reasonably easy to access; grille off, headlight out, screenwash reservoir filler tube pulled off, power steering reservoir lifted off and put to the side, 2 x 8mm hex bolts to undo (need looooong extension) then pull the tank upwards.
As the float in the tank was..you know...floating, I removed the sensor from the new tank (it unclips with some persuasion) and fitted it into the old in situ tank. No need to remove hoses or any of that wet stuff.
So far so good. the warning has not reappeared.
 D1 300Tdi - gone
D2 Td5 ES (Alive remapped...mmm) - sadly gone
D4 2012 SDV6 XS - Stolen
D4 2014 SDV6 HSE - Shiny


 
 
Post #234868724th Sep 2023 3:03 pm
View user's profile Send private message View poster's gallery Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 3 of 4 <1234>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site