Ollram
Member Since: 04 Dec 2006
Location: Gortynia
Posts: 608
  
|
hi to all 
looking for a remanufactured (or new) front diff for Disco 3 (TDV6 year 2006).
Does anyone know any workshop in Europe which deals with diffs??
(unfortunately due to brexit the applied import taxes make purchace from the UK very expensive...  )
thnx
|
 30th May 2022 3:30 pm |
|
|
Breg90
Member Since: 04 Feb 2017
Location: Falkirk
Posts: 360
 
|
What state is your diff in? You could just fit new bearings? Series one 1949 - in bits, chassis is strapped to the ceiling in my garage (beside the canoe)
LR 90 - In bits
Disco 3 - currently in bits
|
| 30th May 2022 9:34 pm |
|
|
Ollram
Member Since: 04 Dec 2006
Location: Gortynia
Posts: 608
|
Hi
thnx for reply 
I occasionally notice a very light grinding noise at low speeds which becomes constant at high speeds (eg. 60-80 miles/h)
Workshop stated that the diff is starting to deteriorate (i can still live with it they stated) but they don't perform rebuild...they just remove it and sent it to a 'specialized shop"...all actions are about 800+ pounds 
so i' m considering what i have to do....
cheers
|
| 31st May 2022 5:42 am |
|
|
Ollram
Member Since: 04 Dec 2006
Location: Gortynia
Posts: 608
|
hi
could you pls give me your opinion on a new OEM front diff (eg. this one https://www.paddockspares.com/axle-asy-front.html).
has anyone installed the above part?? i ve been told it is made in UK...
In Greece the overall price of a new OEM one compared to rebuilding my old part is almost the same.....
thnx a lot for your assistance
|
| 21st Aug 2022 3:00 pm |
|
|
