Member Since: 21 Oct 2016
Location: kent
Posts: 14177
Adaption
Hi
Hope everyone is keeping well , May i ask a daft question please , Have heard that for example u replace ur ATF oil and then best to wait for around 500 x miles before resetting the mechatronic adaptions so it’s not such a shock to the gearbox to have the oil and adaptions done at the same time
However heard that it can take roughly 250 miles for it to relearn, I assumed after them being reset it only takes considerably less distance for the mechatronic to relearn
Once again hope u didn’t mind me asking , many thanks as always
5th Jul 2022 7:45 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10740
I hadn’t heard your first comment.
I don’t think it’s true or for the reason you state. However it’s worth trying so you can clearly see the difference between old and new oil, on the same day
Resetting adaptions makes it shift badly for 3 days in my experience
5th Jul 2022 11:56 am
munst
Member Since: 16 Sep 2020
Location: GLOS
Posts: 155
If you read my post on LZ again you'll see it holds that approx amount in memory and use that info to adjust for the best shifts and driving style apparently. (Info from a transmission rebuild company).
When you clear the adaptions you dont have to drive 250miles for it to sort its self out, it will make changes from the first few shifts if it detects the need to. But after the full distance it will have done all the learning it can and then just keeps a rolling cycle going so it can change as the car does.
Personally it took my D3 about 20mins of driving to settle down after I had my transfusion style flush. Was very revvy for the first few miles then sorted its self out. It had 105k on it at the time and they said it still had the factory sump on so I think it's fair to assume its never been touched.
5th Jul 2022 12:17 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14177
As always thanks so much for the fantastic information
Really like getting the vast range of knowledge from here and it’s really appreciated , did get 10 x litres of mannol AG55 some 2 x years ago, so think I better check the date on it
Do have a big concern and that’s the level plug as it looks like it’s never been undone ,along with it looks plastic , do have some fine small wire brush attachments for my dremel so wonder if that may be the best thing to slowly clean the area up as best as possible before attempting to undo it , pic below of the level plug
Mine has just turned to 100k , many thks as indeed will just drop the ATF oil then refill it following the procedure and temperature
Plus thinking due to the restrictions I have is to leave the plastic sump, mechatronic sleeve and rectangular seal alone until such times I can get a garage to do that for me
As always Thks again
5th Jul 2022 1:43 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14177
Emailed mannol and they very kindly replied with regards to the shelf life of the unopened 10 x litre AG55 I’ve got , wished to share the reply in the hope it may help others
Good afternoon,
Thank you for your email.
The product you have asked has 5-year shelf life.
If you do require any more information, please don’t hesitate in contacting us.
Kind Regards
Lubricate LTD T/A Mannol UK
5th Jul 2022 3:36 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10740
Regarding shelf life.
If you think the oil in the gearbox stays in there for a lifetime or ~10 years,
then why is a sealed oil bottle going to be less realistically ?
I think when oil goes off in a bottle, the sides are sucked in.
Regarding the level plug, have a good look round, and on the other side. It wouldn't surprise me if there is a second, for when they are fitted in a VW, Porsche, BMW etc.
EDIT: Only seams to be 1 level plug, looking at pics on ebay
5th Jul 2022 6:24 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14177
Hi Pete
Why didn’t I think of that , lol, that’s an extremely good point and convinced my current ATF oil is original
When I’m ready to use it I’ll pour some out into a clear dry container to ensure no water is present and that it’s still the sort of golden colour , bless u as always for that
Do have a hand pump which will screw onto a 1 x litre bottle , can just fill the bottles up to make it considerably more manageable
That’s a shame there’s only x 1 level plug , thks a million for ur time looking . Relooks like both filler and sump drain plugs are plastic so will see if there are metal replacements
Honestly mate I can’t thank u enough
Bottle hand pump
5th Jul 2022 8:39 pm
SpiderBaby D3 Decade
Member Since: 21 Sep 2007
Location: Liverpool
Posts: 1412
On my 05 D3 (and still on the original sump / plugs) the fill plug is metal and the drain is plastic
IIRC the drain is only tightened to around 8NmI see no ships........
5th Jul 2022 9:36 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14177
Ah filler plug might be metal after all then, just looks like plastic, at least once I’ve cleaned it up should get a better idea
Many thks
5th Jul 2022 10:24 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10740
Yeap metal.
Replacement one on eBay.
If you don’t want to go near that rusty level plug , and who would
Then look at the FILO method (on here) where you pump oil back in at the front of car using a garden spray bottle.
6th Jul 2022 3:33 am
munst
Member Since: 16 Sep 2020
Location: GLOS
Posts: 155
When they changed mine over to a steel sump they fitted one without a drain plug. Kinda annoying, just means I'll have to use the filo method to change the oil at home.
6th Jul 2022 8:00 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14177
Many thks and will have a another good read of that , will try my best to give it a good clean and try to see if it will loosen without to much force
Great that it’s metal so at least that gives me half a chance , plus with the drain plug only req 8Nm ( thks for the data spider ) I’ll have to get a small torque wrench , maybe a motorbike torque wrench would be suitable with it being such a low rating
Thks again
6th Jul 2022 12:20 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10740
If you remove that metal plug, oil will pour out.
You don’t need a TR for the plastic plug.
It has a kinda locking mechanism, so it will click a lot and turn and then just stop forcing it when it no longer wants to turn
6th Jul 2022 12:42 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14177
That would just be my luck with oil down my sleeve , Just wish to crack it loose so I’ll then know what method I’ll need to follow
That’s brilliant, thks so much for telling me, so similar to the expansion bottle cap
Will be very interesting to see what condition / colour / quantity comes out
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
, Just wish to crack it loose so I’ll then know what method I’ll need to follow
