DISCO3.CO.UK - View topic - EPB not holding vehicle on hills

Advertise on DISCO3.CO.UK

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Log In

DISCO3.CO.UK > Technical (D3)

EPB not holding vehicle on hills

Page 1 of 1

lkrt1u50

Member Since: 20 Jun 2021
Location: Gone
Posts: 10

EPB not holding vehicle on hills

I have looked for the answer through the posts but can't find this one. My EPB is not holding the vehicle on a hill.
Following an issue screaming, I had to pull the emergency release. I have changed the gears in the EPB and one of the cables. Also, new shoes inside recently replaced disks. I have followed the 'bible' on adjusting the brake shoes (both adjustment points).

Handbrake comes on and goes off fine (I have manual transmission) but I noticed not holding on hills, rolling backwards.

Do I readjust the shoes or am I missing some other process?

21st Apr 2022 6:53 am

Bubblehead

Member Since: 01 Jun 2020
Location: Horndean
Posts: 214

2005 Discovery 3 TDV6 HSE Auto Scotia Grey

It sounds to me ( being no expert whatsoever) that they are not adjusted correctly.
I went through the adjustment process a while back but it turned out for me, that it made no difference as one of the shoes was seized and therefore shortly afterwards destroyed the actuator.
I thought I’d sorted it and it then ended up costing me £1500 all in!
Worth getting it checked. 2005 Disco3 HSE Auto 😁

21st Apr 2022 7:05 am

garrycol

Member Since: 06 Dec 2010
Location: Canberra
Posts: 1130

Did you follow the bed in process - this helps balance everything out.

21st Apr 2022 7:13 am

M3DPO

Member Since: 22 Sep 2010
Location: Notts.
Posts: 8213

2014 Discovery 4 3.0 SDV6 HSE Lux Auto Corris Grey

Do bedding in process again and re-adjust them not forgetting the centralising screw, they have possibly bedded themselves in and just need readjusting.
Are you sure they have not been contaminated with oil or grease while being fitted? It can when others can't,
It will when others won't,
It goes where others don't.

21st Apr 2022 7:49 am

lkrt1u50

Member Since: 20 Jun 2021
Location: Gone
Posts: 10

Thank you for the feedback, I did think about readjusting considering they have had some usage to bed in properly. I'll give this a try on Saturday

21st Apr 2022 8:24 am

lkrt1u50

Member Since: 20 Jun 2021
Location: Gone
Posts: 10

I've re-adjusted and tried bedding in procedure but it's just not enough to hold the vehicle still. I'll have to take a disc off but i'm certain that they are not contaminated

23rd Apr 2022 8:12 pm

Page 1 of 1

Jump to:

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Quote Reply

DISCO3.CO.UK is independent and not affiliated to Land Rover.