Member Since: 31 Aug 2010
Location: retford'ish
Posts: 2224
battery box multiplug cable broke. Fixed it
Hi,
need a bit of help to identify what this Black wire with a White trace does, can anyone shed some light for me please
D3 battery box on the engine side of the battery there is a mutliplug and the Black wire with a White trace has been damaged and broken it goes into the green seal position.
can this be soldered back together or some other repair that would be better?
not sure what it does as everything seems to be working fine, it is a D3 I am wanting to buy has a few things needing sorting, this is one bit that I am unsure about
Last edited by riverblanche on 23rd Apr 2022 4:47 pm. Edited 1 time in total
18th Apr 2022 8:43 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14068
Hiya
I think that wire goes to the viscous fan , assume using a multimeter set to continuity to test it from one end of the wire to the other
If that’s the one , will be black and white on top of the connector , bottom of the connector will be black / pink that goes onto the viscous fan
That black / white wire is it pin 8 plse, should be able to see it on the connector
Hope that helps
19th Apr 2022 6:34 am
eightfoot
Member Since: 12 Apr 2015
Location: sunny essex
Posts: 802
just crimp a bridge wire for now to the other side or solder if you have the time to do it nowplease excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
19th Apr 2022 8:06 am
riverblanche
Member Since: 31 Aug 2010
Location: retford'ish
Posts: 2224
Hi,
thanks for the replies
hope your feeling well Gary
I have put an offer in on it, see what they say will be taking a few crimps spare wire and tape and even a little chocolate block to connect it somehow if I do buy it.
Had found a wiring diagram online but it had 200+ pages and after about 60 pages I gave up, had found a Black/White for the fan and also a Black/white for Injector 0, would have expected a bit of un-even running if it was anything to do with the injector loom.
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1812
Looks like enough wire to solder and shrink wrap it.
22nd Apr 2022 7:47 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14068
riverblanche wrote:
Hi,
thanks for the replies
hope your feeling well Gary
I have put an offer in on it, see what they say will be taking a few crimps spare wire and tape and even a little chocolate block to connect it somehow if I do buy it.
Had found a wiring diagram online but it had 200+ pages and after about 60 pages I gave up, had found a Black/White for the fan and also a Black/white for Injector 0, would have expected a bit of un-even running if it was anything to do with the injector loom.
will update if it goes ahead.
Hiya
Fingers crossed all goes well , many thks and always a pleasure to make any small contribution where I can
Hopefully I’ll be able to get mine back on the road very soon , nothing like stretching out a job, lol
Must confess found those connectors by Wago very good as a temp repair until u can do something more permanent , Regarding that wire indeed as u say would expect the engine to run roughly if it had an injector wiring issue , at least if that wire goes to the fan it’s an easy repair, even if u need to run a new wire
All the best to u and the sale
23rd Apr 2022 7:44 am
riverblanche
Member Since: 31 Aug 2010
Location: retford'ish
Posts: 2224
Hi,
update is I bought the D3 twisted in another section of wire and taped it up to drive home.
This afternoon I have soldered in a short section between the break and covered with heat shrink sleeve, checked fan fuse and thats ok so fingers crossed thats one job off the list.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
and after about 60 pages I gave up, had found a Black/White for the fan and also a Black/white for Injector 0, would have expected a bit of un-even running if it was anything to do with the injector loom.
