Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO3.CO.UK > Webasto Fuel Burning Heater

Remote receiver location
Post Reply  Down to end
Page 1 of 1
Dengieboy
 


Member Since: 29 Jan 2022
Location: Suffolk
Posts: 4

United Kingdom 2011 Discovery 4 3.0 SDV6 HSE Auto Baltic BlueDiscovery 4
Remote receiver location

Hi all, I have a 2011 D4 HSE fitted with a Webasto Thermo Top VEVO. There is no timed control in the software under vehicle settings so was thinking of purchasing a T91 remote for it but I first want to check that it has the remote receiver fitted. Can anyone tell me where it is located please? cheers 😊  
Post #227621631st Jan 2022 6:36 pm
View user's profile Send private message View poster's gallery Reply with quote
Flack
 


Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6308

England 2007 Discovery 3 TDV6 XS Auto Stornoway GreyDiscovery 3

It wont be fitted, if it is its in the drivers side rear boot panel, you can just see it if you look up through clip in panel.
You will also need to get it enabled in the CCF file.

Flack Thumbs Up 

Last edited by Flack on 31st Jan 2022 6:47 pm. Edited 1 time in total 
Post #227621831st Jan 2022 6:46 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10699

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

I don’t think they would fit the box for fun or free

In the boot behind the right side panel.  
Post #227621931st Jan 2022 6:47 pm
View user's profile Send private message View poster's gallery Reply with quote
jonnyboy54321
 


Member Since: 14 Jul 2012
Location: surrey
Posts: 121

United Kingdom 2013 Discovery 4 3.0 SDV6 GS Auto Indus SilverDiscovery 4
Re: Remote receiver location

Dengieboy wrote:
Hi all, I have a 2011 D4 HSE fitted with a Webasto Thermo Top VEVO. There is no timed control in the software under vehicle settings so was thinking of purchasing a T91 remote for it but I first want to check that it has the remote receiver fitted. Can anyone tell me where it is located please? cheers 😊








As has been said, in the rear offside compartment.  
Post #227623131st Jan 2022 7:53 pm
View user's profile Send private message View poster's gallery Reply with quote
Dengieboy
 


Member Since: 29 Jan 2022
Location: Suffolk
Posts: 4

United Kingdom 2011 Discovery 4 3.0 SDV6 HSE Auto Baltic BlueDiscovery 4

Thanks guy's, photos are a great help thanks 👍

If its not fitted then how was the heater operated as there's no timed option in the vehicle settings?
Also looking in to purchasing Gap tool as I think you can enable the aux heater if im right.  
Post #227624331st Jan 2022 8:24 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10699

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

Yeap.

When you start the engine below 5 C it fires up to help the engine maintain temp  
Post #227624531st Jan 2022 8:30 pm
View user's profile Send private message View poster's gallery Reply with quote
darrind
 


Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2900

England 2013 Discovery 4 3.0 SDV6 HSE Auto Santorini BlackDiscovery 4

Dengieboy wrote:
Thanks guy's, photos are a great help thanks 👍

If its not fitted then how was the heater operated as there's no timed option in the vehicle settings?
Also looking in to purchasing Gap tool as I think you can enable the aux heater if im right.


If you are buying a Gap iiD you can enable the timed remote that will allow you to use a manual on off and set a timed start for the FBH. With the IID you can also enable the remote kit once you buy it. Often they are offered as a complete set of the aerial, receiver and remote but I found it it works out cheaper to buy them separately - a word of warning though often the remotes offered on Ebay that say they are compatible LR parts are not actually compatible with the D4 Unit and are actually for Evoques or Disco Sport.

If you have a fiddle through the side pod where the jack is stored you can fit the components without having to take the side trim off - just position the aerial lower ( it doesnt seem to make make much difference to the range) Must stop buying shiny toys....  
Post #227626031st Jan 2022 9:41 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site