Spannerman
Member Since: 13 Feb 2010
Location: woodford green
Posts: 16
  
|
HAS ANY BODY ENCOUNTERED A SLIGHT LEAK FROM THE NUT ON THE TOP OF THE FUEL INJECTOR ON A DISCO 3 - ITS NOT FROM THE SPILL OFF PIPE -BUT WHEN ITS BEEN CLEANED UP, IT SLOWLY SEEPS A SMALL AMOUNT OF DIESEL AT THIS POINT ( in and around the nut )EVENTUALLY ENDING UP WITH THE DEISEL LAYING IN THE PLASTIC TRAY BELLOW. Can this be tightened here ? or is it time to replace the injector ? Am I right in thinking on a disco 3 it can just be fitted without further diagnostics sinking the injector in. Any help /guidance would gratefully received. trevor weldon
|
 23rd Jan 2022 5:18 pm |
|
|
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2463
|
LR say the pipes need replacing if they are removed, i would try tightening it up a bit more and if that doesnt work replace the pipe.
There is no coding required on a D3 Andrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
|
| 23rd Jan 2022 5:30 pm |
|
|
Spannerman
Member Since: 13 Feb 2010
Location: woodford green
Posts: 16
|
Thanks for that - but maybe I should have made it clear it is not where the injection pipe from the fuel bar meets the injector- it is leaking from the nut on the injector body below the electrical plug. Any ideas?
Thanks trevor weldon
|
| 23rd Jan 2022 7:38 pm |
|
|
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2463
|
I would just replace the injector. Andrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
|
| 23rd Jan 2022 7:39 pm |
|
|
Spannerman
Member Since: 13 Feb 2010
Location: woodford green
Posts: 16
|
Thanks for that - but maybe I should have made it clear it is not where the injection pipe from the fuel bar meets the injector- it is leaking from the nut on the injector body below the electrical plug. Any ideas?
Thanks trevor weldon
|
| 23rd Jan 2022 7:48 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10734
 
|
Replace injector.
Could get your old one reconditioned if you wanted as a spare
|
| 23rd Jan 2022 8:25 pm |
|
|
CraigE
Member Since: 24 Dec 2020
Location: South Yunderup
Posts: 19
  
|
Rehashing this as have the same. Has anyone actually undone and resealed the thread. Easy to say replace injector but that is a huge expense for a small leak on the thread, but also aware consequences of a fire are worse. Has anyone actually either tightened this up or undone and re-sealed?
Cheers
Craig
|
| 21st Dec 2022 4:00 am |
|
|
ekwan
Member Since: 24 Apr 2016
Location: P Jaya
Posts: 35
  
|
It’s a high precision item
|
| 22nd Dec 2022 1:36 am |
|
|
|
|
