Tombombleron
Member Since: 01 Apr 2021
Location: London
Posts: 3
  
|
| clacking after turning the engine off |
|
Does anyone have any idea what this funny clacking noise might be which happens after turning the engine off? Transfer box perhaps?
Starts about 6 secs into the video - low range still works fine and makes a similar noise when it engages (albeit only one clack).
D3 07 HSE auto, 185k miles.
Changed the lower steering column yesterday, it put up a fight but don't think I knocked anything out of place!
|
 5th Dec 2021 12:28 pm |
|
|
sisu
Member Since: 24 Aug 2021
Location: Freiburg
Posts: 15
  
|
Hello,
these are your EGR valves that clean themselves by moving several times. The noise gets louder over time as the mechanical components of the valve wear out. At some point, the mechanism will break down and you will have to replace the EGR.
Cheers
Daniel
|
| 6th Dec 2021 10:20 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10676
 
|
That’s what I said in a recent post (and the turbo vvt)
However Mike said if was the transfer box.
I think he said if needed recalibrating
|
| 6th Dec 2021 12:23 pm |
|
|
Yankee_Rover
Member Since: 02 Jun 2021
Location: Seattle
Posts: 183
  
|
Indeed a transfer box requiring calibration (and perhaps fresh fluid) will click upon shutoff. When it happened to mine it was two separate clicks, not the repeated clicking heard in the video. Transfer box also will produce a small shudder when making tight, low speed turns, almost as if a wheel is dragging. I think these symptoms in conjunction pinpoint the TB having an issue. I’d try some low speed maneuvers to help rule out TB. 2008 LR3 HSE, 4.4L V8
|
| 9th Dec 2021 3:27 am |
|
|
