Hi
Hope somebody can advise or point me in the right direction. Cold mornings are here and fuel burner firing up OK. But I noticed that the exhaust fumes where coming inside the cabin Open bonnet and fuel burning running OK but around the exhaust box ( looks like an silencer) near the seams exhaust smoke was escaping thus coming in through the vents. My question is can this be fixed via a solder along the seam or do I need a new exhaust?
Cheers SteveD3 HSE
5th Nov 2021 2:39 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4469
The flexi tubes are only attached with jubilee type clips. They don't seal very well even when new. Could it be a leak at the pipe joint?Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
5th Nov 2021 3:16 pm
Motolab
Member Since: 18 Oct 2019
Location: Sleen
Posts: 1820
i have seen, spider webs, leafes, dust, mud, melted plastic intake silencers touching the exhaust, all causing smokeBest regards
Harold
Always looking for Pre '55's & Pre war British Motorcycles! knowing or having one for sale? PM please. I visit the UK 6 times a year
Ps. I edit my texts quite often, english is not my native language, so I will edit My “typo’s” etc.
5th Nov 2021 3:25 pm
Beno2
Member Since: 18 Apr 2009
Location: SE
Posts: 991
I can see the smoke escaping from the side seam of the metal box only not the flexible hoses other than that it works perfectD3 HSE
5th Nov 2021 3:59 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4469
Some two part epoxy like JB Weld might fix it. Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
5th Nov 2021 4:11 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
Its an exhaust, and being gas tight is one of its jobs.
So to save yourself and to stop your car potentially burning, I suggest you repair it or replace it.
Exhaust pipe is cheap enough on ebay, silencer is not essential if you wish to keep costs down, most small diesel heaters are are 22 or 24mm id.
Did you check the small rubber pipe leading into the heater? these age/leak spray fuel about.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum