Member Since: 16 Sep 2019
Location: Swindon
Posts: 41
2013 D4 Heated Wheel Upgrade
I know this topic has been done to death but something still puzzles me and I've seen no mention of it;
I bought a heated wheel, clock spring, and both switch packs as my previous wheel had neither heat nor cruise control. With everything installed, CCF configured and power at the clock spring, naturally the heated wheel isn't working. No orange or green light, no heat. I do however have a spare plug from the heater module, MY14, with nowhere to go (it isn't the one that goes into the back of the switch pack). Have I bought the wrong setup here or am I blind?
Click image to enlarge
Thanks in advance.
9th Oct 2021 4:10 pm
s60r
Member Since: 14 Mar 2021
Location: West Sussex
Posts: 287
Did this not so long ago…..
That is the power to the heater element I think.
If you look at the loom coming from the car it will have some black tape around it, carefully unpick the tape and the receiver for your plug should be there…… well mine was!
A mod a week until I have nothing to improve or add.
9th Oct 2021 11:38 pm
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4252
As S60r says, the plug will be WELL taped up just below or to the side of the steering column if I remember correctly... the alternative is to buy a made up cable from the forum shop and connect that to the cigarette lighter feed in the centre console (unless someone on this post has an unused one for sale )...I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
10th Oct 2021 7:48 am
JafaDiscoIV
Member Since: 16 Sep 2019
Location: Swindon
Posts: 41
s60r wrote:
Did this not so long ago…..
That is the power to the heater element I think.
If you look at the loom coming from the car it will have some black tape around it, carefully unpick the tape and the receiver for your plug should be there…… well mine was!
Do you mean the loom coming from the clock spring or the loom coming from the vehicle in the steering column? I've already found the spare connecter that's wrapped in foam and plugged it into the column side of the clock spring.
This plug has 4 wires, Black - Red - Double white into one pin.
10th Oct 2021 4:58 pm
Famousfive
Member Since: 12 Aug 2014
Location: Southampton
Posts: 1838
The heater wheel loom changed in MY14. Could be that you have the wrong MY loom. Where did the wheel come from?Stolen - D4 Loire Blue
D4 Bali Blue
10th Oct 2021 7:41 pm
s60r
Member Since: 14 Mar 2021
Location: West Sussex
Posts: 287
Yes…. I was supplied an entire loom with my wheel…. My puppy ate it! Lol. Luckily I didn’t need it.
What year is your D4 and what year is the wheel and clock from?A mod a week until I have nothing to improve or add.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
)...
