Member Since: 25 May 2021
Location: north yorkshire
Posts: 6
Soft nudge bar bolts
Hi all
Does anyone know the diameter and lengths of the 4 D3 soft nudge bar mounting bolts and sleeves
These are the ones that bolt through the bumper cover and fasten the nudge bar to the brackets
I have the brackets but not the 4 lower bolts and sleeves
if GStuart doesn't reply soon, PM him. He's fitting an A-frame at the mo.
13th Jul 2021 7:49 pm
psmith507
Member Since: 25 May 2021
Location: north yorkshire
Posts: 6
Thanks, let's hope he does or I can pm him successfully
13th Jul 2021 7:51 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14129
Re: Soft nudge bar bolts
psmith507 wrote:
Hi all
Does anyone know the diameter and lengths of the 4 D3 soft nudge bar mounting bolts and sleeves
These are the ones that bolt through the bumper cover and fasten the nudge bar to the brackets
I have the brackets but not the 4 lower bolts and sleeves
Thanks in advance
Hi
Apologises mine didn’t come with a fitting bit , plus because I haven’t fitted it onto the impact bar yet I don’t know the correct length of the bolts yet nor the length of the sleeves as of yet
Sorry about that , hopefully someone else will be along to let u know very soon what they are
Last edited by gstuart on 14th Jul 2021 9:45 am. Edited 1 time in total
Member Since: 21 Oct 2016
Location: kent
Posts: 14129
Must admit have searched alot of documents and haven’t found one yet with specifications of those sleeves or exact size of the bolts
14th Jul 2021 9:47 am
Rob698
Member Since: 06 Sep 2018
Location: Manchester
Posts: 29
Bolt sizes:
L: 70mm with a 22mm effective thread, Dia: 8mm and 13mm head
Washers:
OD: 25mm, ID:9mm and 1mm thick
Sleeves sizes:
2 x L:48mm, OD:14mm and ID:10mm
2 x L:37mm, OD:14mm and ID:10mm
18th Jul 2021 3:05 pm
D1SCD
Member Since: 13 Feb 2013
Location: North Yorkshire
Posts: 439
Good answer - very useful
18th Jul 2021 3:25 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14129
Rob698 wrote:
Bolt sizes:
L: 70mm with a 22mm effective thread, Dia: 8mm and 13mm head
Washers:
OD: 25mm, ID:9mm and 1mm thick
Sleeves sizes:
2 x L:48mm, OD:14mm and ID:10mm
2 x L:37mm, OD:14mm and ID:10mm
Ur a legend , thank u so much
Now onto ebay to find some , think I’ll also get all of them in stainless steel
Plus think I may have found some plastic caps that go over the 4 x bolts that go through the bumper , won’t know though u til I get them but look very close
Thks a million once again
18th Jul 2021 4:19 pm
Rob698
Member Since: 06 Sep 2018
Location: Manchester
Posts: 29
No problem, luckly I haven't had chance to put my nudge bar on yet.
18th Jul 2021 5:49 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14129
Very handy for us then, lol
Have managed to get some of the spot light mounting brackets, along with the top brackets that are secured onto the top of the grill , however I’m not sure if I’m going to fit these
Got my A bar very cheap because it didn’t come with a fitting kit plus has a slight bit of damage , going to try some textured spray paint after the repair to see by spraying the entire A bar if it will be noticeable
Sanding down wise I’m thinking if a green scotch pad will be suffice with it not being too aggressive
Ref the mounting holes don’t think I’ll drill the specified 33mm holes
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
