Member Since: 09 Nov 2019
Location: Huntingdon
Posts: 116
Snagging after body off to replace engine
Got car back but had water leak turned out to be thermostat housing split on the plastic weld so replaced that , but screen washer leaking now, can anyone tell me if I can get to it from the n/s/f wheel well to put the pipe back on or is it bumper off job! again! plus also got transmision fluid leak discovered when getting the A/C regassed and 4 wheel tracking done today Was not leaking before the body off job.
12th Jun 2021 7:02 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10684
Don’t need to remove the bumper
Test front and rear is connected the right way round
12th Jun 2021 8:13 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5044
Just remove the wheel arch liner, it's easy to mix up the water lines if they have not been marked! yµ (idµ - eAµ) ψ=mψ
12th Jun 2021 8:16 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14136
As above ^^^^^
Here’s a pic as well for u , hope it helps
Click image to enlarge
12th Jun 2021 8:53 pm
andy.p
Member Since: 09 Nov 2019
Location: Huntingdon
Posts: 116
Cheers for the picture and the info chaps it's just i think that when they put the body back on they forgot to reconnect the pipe work as I keep getting wet feet when filling it and "low washer fluid" warning after 1 or 2 use's
13th Jun 2021 7:07 am
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5044
Sounds like the tank has partially split.yµ (idµ - eAµ) ψ=mψ
13th Jun 2021 11:58 am
andy.p
Member Since: 09 Nov 2019
Location: Huntingdon
Posts: 116
Nah the little forgot to put a pipe back on one of the pumps all sorted now.But got a transmission oil leak too and while under wheel arch sorting the washer bottle I spotted that when they put the engine and gearbox back in it looks like the oil cooler pipes are rubbing on the transfer shaft well they can sort that one out on monday under warranty, as I can't seem to find new oil cooler pipes for the auto box anywhere except for a d4/rrs more than likely the same on a D3 but I am not paying for them after spending £4500 already!
13th Jun 2021 12:34 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14136
andy.p wrote:
Cheers for the picture and the info chaps it's just i think that when they put the body back on they forgot to reconnect the pipe work as I keep getting wet feet when filling it and "low washer fluid" warning after 1 or 2 use's
Great the pic helped along with of course the other awesome members
Is this was u was looking for , just in case they need to buy u a new one ref, LR037224
Member Since: 09 Nov 2019
Location: Huntingdon
Posts: 116
Wow cheers for that info, the part number i found was UPB500340 on a second hand part on ebay but they can deffo pay for a new one from britcar! cheers Gary.
13th Jun 2021 1:21 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14136
Ur so welcome
Managed to find this ref that part number
UBP500340 - OIL COOLER TUBE - LION DIESEL 2.7L V6 - DISCOVERY 3 FROM VIN 7A000001 TO 2009 - RANGE ROVER SPORT FROM VIN 7A000001 TO 2009 - DISCOVERY 4 FROM VIN AA000001 TO 2016
Indeed, hope it all gets sorted out, particularly after you’ve paid out so much money
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum