ELD70
Member Since: 28 Jan 2008
Location: Romford.
Posts: 901
  
|
| Mult Height Towbar Towball Height? |
|
Can anyone who tows (horseboxes mainly) tell me what height they have their tow ball set at? My dealer fitted one is set at 350mm which is way too low, 450mm looks to be the height I need.
|
 15th Nov 2008 2:47 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
generally they're 400 or 450 ISTR 450 being more the std.
Easy to change on the MH though, you just undo the bolts & move it up  Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 15th Nov 2008 3:19 pm |
|
|
741hcr
Member Since: 12 Apr 2007
Location: Usually in front of the PC
Posts: 175
 
|
The answer may be within this thread http://www.disco3.co.uk/forum/topic27141.html but to summarise, 400-450 appears to be the correct height for an Ifor horse box.
|
| 15th Nov 2008 3:20 pm |
|
|
ELD70
Member Since: 28 Jan 2008
Location: Romford.
Posts: 901
|
Just set it to 450mm which seems to be correct. Thanks guys.
|
| 15th Nov 2008 7:11 pm |
|
|
Apny
Member Since: 03 Jan 2008
Location: Norfolk
Posts: 198
 
|
Martin, and Moderators
Could a sticky be made from questions relating to Tow ball heights, as there seems to be a lot of questions and answers weekly now on setting heights?
Andy
|
| 16th Nov 2008 8:42 am |
|
|
Gareth
Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26774
|
Stickied
Post your heights here.
|
| 16th Nov 2008 8:56 am |
|
|
The Irish Rover
Member Since: 18 Mar 2009
Location: Dublin
Posts: 3
 
|
450 is the proper height especially for ifor williams trailers.Any lower then this height and the trailer will "snake".
Hope this helps... Disco Metropolis probably the best D3 in the world!!!
|
| 19th Mar 2009 7:51 pm |
|
|
rzuluaga
Member Since: 05 Mar 2006
Location: USA
Posts: 18
 
|
The Irish Rover wrote:450 is the proper height especially for ifor williams trailers.Any lower then this height and the trailer will "snake".
Hope this helps...
|
| 25th Mar 2009 1:31 am |
|
|
mattdaniels
Member Since: 23 May 2010
Location: Milton Keynes
Posts: 85
|
You're not towing an Equitrek by any chance are you?
Ours seems to sit a bit nose low on the Disco (removable tow hitch). The ball height is about 16 inches. On our old Isuzu it was just over 18 inches and the trailer was level on that.
There are no shims on the Equitrek hitch so we can't adjust it to make it any lower.
|
| 16th Jul 2010 7:44 pm |
|
|
Tufty
Member Since: 13 Jul 2010
Location: UK
Posts: 481
|
Hi all,
I have just fitted a multiplate towbar on the D3, it seems by the symbol on the plate that the ball can only be attached to the bottom two holes (with the top 4 for fixing it to the rear section) or turned upside down and the ball attached to the top two (with the bottom 4 for fixing it to the rear section).
So I thought I'd be clever and remove the plate and fix the ball to the bottom row of the rear section but again found a symbol that says the ball can only be attached to the top pair??
Does anyone know why this is??
Has anyone just ignored this and stuck the ball to the height they wanted anyway??
Cheers
|
| 27th Jul 2010 9:38 pm |
|
|
hensoni
Member Since: 01 Oct 2007
Location: Sleepy Somerset
Posts: 576
|
The "do not do this" symbol is for a pin/eye connection - not a 50mm ball. You can attach your ball in any combination and keep the full 3500kg capacity Club missing my D3
|
| 5th Aug 2010 1:39 pm |
|
|
Tufty
Member Since: 13 Jul 2010
Location: UK
Posts: 481
|
Cheers 
|
| 5th Aug 2010 1:57 pm |
|
|
sbrown
Member Since: 30 Apr 2010
Location: S. Yorkshire
Posts: 86
|
Admittedly I haven't seen this at all as I'm yet to get my D4 but hypothetically which level would be correct for a ball and pin type hitch.
I assume (without looking) that the ball is higher on the ball and pin than on a ball only hitch? If this is the case I would guess at wanting the middle bolt holes, am I right in thinking that this isn't possible withe the multi-height hitch? Or have I got this completely wrong?
|
| 5th Aug 2010 2:57 pm |
|
|
bigjim
Member Since: 30 May 2012
Location: Winchester
Posts: 26
|
On the subject of Equitrek, be very very careful.
I attended a hampshire fire service equine/large animal rescue seminar a couple of weeks ago. And while it was very interesting and informative, the overwhelming theme was that rear or side facing horse boxes were lethal, and non-hgv horse transport where the horse is carried on a floor above the wheels was problematic for an average driver.
And get this, the speaker said that about 40% of equine rescues involving a horse which has become displaced inside its horse box involve Equitrek boxes. Staggering. He even went as far as saying that if he could, he would ban them from the road instantly.
And this is a man with 30 years experience in this area.
|
| 30th May 2012 4:40 pm |
|
|
blue200tdi
Member Since: 23 Sep 2012
Location: Lincoln
Posts: 1094
|
This gives you the correct heights if you scroll down. http://media.disco3.co.uk/ownerinfo/LR0057...height.pdf You guys are gonna be busier than a test bench in a plunger factory!
Java black 2006 2.7 TDV6 HSE AUTO.
2014 Kawasaki ZZR1400 Performance sport.
|
| 26th Mar 2013 10:34 pm |
|
|
